[2021] H12-211 All-in-One Exam Guide Practice To your H12-211 Exam! [Q153-Q176]

Share

[2021] H12-211 All-in-One Exam Guide Practice To your H12-211 Exam!

Preparations of H12-211 Exam 2021 HCNA Unlimited 320 Questions

NEW QUESTION 153
Which of the following routing protocols are available?

  • A. IPX
  • B. IP
  • C. OSPF
  • D. BGP

Answer: A,B

 

NEW QUESTION 154
In the RIP routing protocol, the following mechanism for reducing the routing from the ring is the correct statement

  • A. self-loop in order to reduce the consequences of routing, RIP protocol specifies the maximum number of hops
  • B. Set the time may lead to suppression of the slow convergence of routing
  • C. Split horizon means only the elimination of the self-loop between two routers have a role
  • D. triggered updates to a certain extent, to avoid routing loops occur

Answer: A,B,C,D

 

NEW QUESTION 155
<Huawei>reset saved-configuration
Warning: The action will delete the saved configuration in the device.
The configuration will be erased to reconfigure. Continue? [Y/N]:
Refer to the configuration output. Which of the following statements are true? (Select two answers)

  • A. A user should enter 'Y' when wishing to clear the saved configuration file.
  • B. The saved-configuration file will be replaced with the current-configuration.
  • C. The saved-configuration will be deleted after typing N
  • D. The saved-configuration file that the device starts with can be erased.

Answer: A,D

 

NEW QUESTION 156
During device startup, the device selects a VRP version files depends on the configuration saved in the ( ) storage medium?

  • A. SD card
  • B. USB
  • C. Flash memory
  • D. NVRAM

Answer: C

 

NEW QUESTION 157
If you want to connect two computers directly via twisted pair, the correct line sequence is

  • A. 1 - 2,2 - 1 ,3 - 6 ,4 - 4 ,5 - 5 ,6 - 3 ,7 - 7 ,8-8
  • B. Both computers can connect directly through twisted-pair
  • C. 1 - 1,2 - 2 ,3 - 3 ,4 - 4 ,5 - 5 ,6 - 6 ,7 - 7 ,8 - 8
  • D. 1 - 3,2 - 6 ,3 - 1 ,4 - 4 ,5 - 5 ,6 - 2 ,7 - 7 ,8 - 8

Answer: D

 

NEW QUESTION 158
The administrator plans to implement a route backup by configuring a static floating route. The correct implementation method is ().

  • A. The administrator needs to configure different metrics for the primary static route and the alternate static route.
  • B. The administrator needs to configure different TAGs for the primary static route and the standby static route.
  • C. The administrator only needs to configure two static routes.
  • D. The administrator needs to configure different protocol priority values for the primary static route and the alternate static route.

Answer: D

 

NEW QUESTION 159
If the transport-layer protocol is UDP, the value of the "Protocol" field at the network layer is 6.

  • A. False
  • B. True

Answer: A

 

NEW QUESTION 160
A router via RIP, OSPF, BGP and static routes are learning to reach the same destination address routing. By default, VRP will eventually selected () routing as the optimal route

  • A. Static routes
  • B. OSPF
  • C. RIP
  • D. BGP

Answer: B

 

NEW QUESTION 161
A router has learned two routes for the same network with the same prefix. One route has been learned via OSPF with a metric of 4882, while the other route has been learned via RIPv2 with a metric of 4.
Which route (s) will be found in the routing table?

  • A. The OSPF route.
  • B. The RIPv2 route.
  • C. The OSPF and RIPv2 routes.
  • D. Neither of these routes will be found in the routing table.

Answer: A

Explanation:
Explanation

 

NEW QUESTION 162
Now there are four network segments 10.24_0_0/24, 10.24.1_0/24, 10.24.2.0/24, 1024.3.0/24_ Which of the following network segments can be summarized? (Multiple choice)

  • A. 10.24.0.0/23
  • B. 10.24.1.0/23
  • C. 1 0.24,00/21
  • D. 10.24.0.0/22

Answer: C,D

 

NEW QUESTION 163
[Huawei]history-command max-size 20
Refer to the command output. Which statements regarding the shown command are true? (Choose two)

  • A. The command should be configured in the user-interface view.
  • B. The default value of the history command buffer is 5.
  • C. Once configured, commands totaling up to 20 bytes can be saved in the buffer.
  • D. The command is used to adjust the size of the history command buffer.

Answer: A,D

 

NEW QUESTION 164
The load balancing modes of the two ends of the Eth-Trunk can be inconsistent.

  • A. TRUE
  • B. FALSE

Answer: A

 

NEW QUESTION 165
Can be used to coordinate port auto-negotiation technology, the speed, duplex mode and so on. When the negotiating parties will support a variety of ways of working, which has the highest priority

  • A. 10BASE-T full-duplex
  • B. 100BASE-TX
  • C. 100BASE-T4
  • D. 100BASE-TX full duplex

Answer: D

 

NEW QUESTION 166
OSI Reference Model () function is in the bit stream transmitted between devices.

  • A. Network Layer
  • B. Data Link Layer
  • C. Application layer
  • D. Physical Layer

Answer: D

 

NEW QUESTION 167
Based on tv1PLS labels, you can mark up to how many types of data streams with different service fevers?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D

 

NEW QUESTION 168
PING 10.0.0.2: 56 data bytes, press CTRL_C to break
Reply from 10.0.0.2: bytes=56 Sequence=1 ttl=128 time=60 ms Reply from 10.0.0.2: bytes=56 Sequence=2 ttl=128 time=40 ms
--- 10.0.0.2 ping statistics --- 2 packet(s) transmitted
2 packet(s) received
0.00% packet loss
round-trip min/avg/max = 40/46/60 ms
The Network Administartor can run the "ping" command on the AR G3 router to test the connectivity to
10.0.0.2. Wh/ich of the following statement is true about the command output?

  • A. The Command used by the network administrator is "ping -c 2 -s 800 10.0.0.2"
  • B. The network administartor changes the default TTL value to 255
  • C. The Command used by the network administrator is "ping -a 2 -v 800 10.0.0.2"
  • D. The destination address 10.0.0.2 is unreachable.

Answer: A

 

NEW QUESTION 169
Which of the following statements are correct? (Choose two)

  • A. A single broadcast domain exists between SWA and SWC.
  • B. A single broadcast domain exists between SWA and SW
  • C. A single collision domain exists between RTA and SWC.
  • D. A single collision domain exists between SWA and SW

Answer: A,D

 

NEW QUESTION 170
The following statement on which Frame Relay is correct ().

  • A. Frame Relay address mapping table is stored inside the next hop IP address and the DLCI mapping
  • B. PVC is only in the virtual connection between the DCE
  • C. DLCI only in the local interface and directly connected to the terminal interface to the effective
  • D. Reverse Address Resolution Protocol IP can be obtained through the end of the corresponding DLCI

Answer: A,C

 

NEW QUESTION 171
DHCPV6 clients must obtain both IPv6 addresses and other configurations from the DHCPv6 server.

  • A. TRUE
  • B. FALSE

Answer: B

 

NEW QUESTION 172
10Base 2 using () for data transmission

  • A. Coaxial
  • B. twisted pair
  • C. fiber
  • D. Radio waves

Answer: A

 

NEW QUESTION 173
When a switch port sends a data frame with the same VLAN tag and PVID , the switch port removes the VLAN tag and forwards frame.

  • A. TRUE
  • B. FALSE

Answer: A

 

NEW QUESTION 174
You can use the vlan batch command to create multiple VLANs in batches on the Huawei switch to simplify the configuration process.

  • A. Correct
  • B. Error

Answer: A

 

NEW QUESTION 175
The root protection function provided by RSTP can take effect only on designated ports

  • A. TRUE
  • B. FALSE

Answer: A

 

NEW QUESTION 176
......

Focus on H12-211 All-in-One Exam Guide For Quick Preparation: https://www.dumpstests.com/H12-211-latest-test-dumps.html