Veeam VMCE_V10 Dumps - 100% Cover Real Exam Questions (Updated 50 Questions)
Real VMCE_V10 dumps - Real Veeam dumps PDF
NEW QUESTION 17
Which of the following is a backup mode that can be configured within a Veeam Agent for Windows backup job?
- A. Forward incremental with optional periodic synthetic and/or active full backups
- B. Forward incremental and reverse incremental, both with optional periodic synthetic and/or active full backups
- C. Reverse incremental with optional periodic synthetic full backups
- D. Reverse incremental with periodic active full backups
Answer: C
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/forward_incremental_backup.html?ver=
100
NEW QUESTION 18
Which of the following scenarios properly applies the 3-2-1 rule to backup jobs?
- A. Use a backup job to back up to a local repository; perform a backup copy job to a repository in another location
- B. Use a backup job to back up to a Scale-out Backup Repository configured with capacity tier using AWS S3 and enable move mode
- C. Use backup jobs to back up directly to tape; ship the tapes off site
- D. Use a backup job to back up to a local repository; perform a backup copy job to the same repository
Answer: D
NEW QUESTION 19
A backup administrator is planning to install Veeam ONE. Which data collection mode collects the most data per VM?
- A. For backup data only
- B. Optimized for advanced scalability deployment
- C. Optimized for typical deployment
- D. For vCenter data only
Answer: B
Explanation:
Reference:
https://helpcenter.veeam.com/docs/one/deployment/data_collection_modes.html?ver=100
NEW QUESTION 20
When you back up regular or standalone VMs in vCloud Director, which of the following is captured and stored in Veeam's Backup & Replication backup file? (Choose three.)
- A. VM metadata
- B. VM disk content
- C. Raw device mapping
- D. Linked clone VM's prior to vCenter 6.5
- E. In-guest iSCSI disk
- F. vApp metadata
Answer: A,B,F
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/vcloud_regular_vm_restore.html?ver=
100
NEW QUESTION 21
Which Veeam Backup & Replication job type offers the shortest recovery time objective (RTO)?
- A. File to tape
- B. Backup to tape
- C. Replication
- D. Backup copy
Answer: C
Explanation:
Reference: https://helpcenter.veeam.com/docs/backup/vsphere/replication.html?ver=100
NEW QUESTION 22
A company has separate networks for management traffic and data traffic. All Veeam components are communicating over the management network. How would they define the data network for backup data transfers?
- A. Use the preferred network settings to switch to data network for the backup traffic
- B. Update routing tables on the components involved in data transfer
- C. Create a global network traffic rule, set appropriate source and target IP range
- D. Re-add all Veeam components involved in data transfer through the required interfaces
Answer: C
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/select_backup_network.html?ver=100
NEW QUESTION 23
A company is required to have a daily backup with a retention of at least six weeks. The backups are running every eight hours during the day. From the options provided, what backup job would you advise based on their SLA and best practices?
- A. Forever forward incremental backup, with a retention of 42 restore points, savings six weekly full backups
- B. Forward incremental backup with weekly synthetic full backups and a retention of 42 days
- C. Forever forward incremental backup, with default job settings enabled
- D. Forever forward incremental backup, with a retention of 42 restore points
Answer: C
NEW QUESTION 24
What transport mode does the Linux backup proxy support?
- A. Direct storage access
- B. Virtual appliance
- C. Automatic
- D. Network
Answer: B
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/backup_proxy.html?ver=100
NEW QUESTION 25
A NAS backup job has been configured within Veeam Backup & Replication, and is completing successfully, but restore operations have been failing for the last few days.
What is causing the failure?
- A. The backup repository is sealed
- B. The cache repository assigned for this file share is unavailable for restore operations
- C. The credentials added to the share are not allowed read-write access to the share, directories or files
- D. The server was added by using an IQN alias which is unable to be resolved
Answer: C
NEW QUESTION 26
You use datastores as the source for your backup jobs. Some VM backups are consuming too much repository disk space. They have backup files created by multiple backup jobs.
What could be the reason? (Choose two.)
- A. VM retention is set to do full backups more often than others in the job
- B. The VM is in a backup chain and trapped inside a single retention file
- C. The VMs were moved to different datastores manually
- D. Jobs are configured as per VM and these particular VM's need more fulls
- E. VMware Storage DRS (Distributed Resource Scheduler) moved VMs to different datastores
Answer: C,D
Explanation:
Explanation: Section: (none)
NEW QUESTION 27
Figure A shows the backup files on a Scale-out Backup Repository (SOBR) created by a single Veeam backup job. The SOBR is configured to offload to capacity tier in move mode. If the offload was completed successfully, what will remain on the performance extents for the files uploaded to the capacity tier?
- A. VIB and VBK files (metadata only)
- B. VBM files (metadata only)
- C. VIB and VBK files (data blocks only)
- D. VBK files (metadata and data)
- E. VIB files (metadata and data)
Answer: A
NEW QUESTION 28
A backup administrator needs to restore two data drives to a VM where the operating system remains intact. The target machine must remain powered on. What recovery option is most appropriate to perform this operation?
- A. Restore entire VM
- B. Instant VM Recovery
- C. Restore VM files
- D. Instant disk recovery
Answer: B
Explanation:
Explanation: Section: (none)
Explanation
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/instant_recovery.html?ver=100
NEW QUESTION 29
A backup administrator is deploying a Veeam ONE environment. They have chosen to use separate servers from their Veeam Backup & Replication environment. What benefit will they receive if they install the Veeam ONE Agent onto their backup server?
- A. Collect Veeam Backup & Replication logs and execute remediation actions
- B. Analyze Veeam Backup & Replication log data and retrieve signature updates
- C. Collect virtual environment configuration from Veeam Backup & Replication
- D. Track whether VMs and agents are properly protected and following the 3-2-1 rule
Answer: C
NEW QUESTION 30
What are the three Veeam Backup & Replication technologies required to verify recoverability of the backup? (Choose three.)
- A. Replication job
- B. Backup proxy
- C. Application group
- D. SureBackup job
- E. Virtual lab
- F. Gateway Server
Answer: A,D,E
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/recovery_verification_overview.html?v er=100
NEW QUESTION 31
A backup job has been configured to keep three incremental restore points and a synthetic full backup each Sunday. More restore points are present on disk than what was configured in the job. Why?
- A. Per VM backup files are enabled in the repository
- B. You should configure the synthetic full backup to be performed on Mondays instead
- C. The old restore points will be deleted after the new restore chain meets the retention policy
- D. The other restore points are weekly full backups, this is expected
Answer: D
Explanation:
Reference: https://www.veeam.com/kb1990
NEW QUESTION 32
If you need to run a script to stop a service in order to get an application-consistent backup on a Windows server, where can the script be run?
- A. Configure the script to run on the Veeam Backup & Replication server using the Windows Task Scheduler
- B. Copy the script to the VM and schedule the script to run prior to the start of the backup job using the Windows Task Scheduler in the VM
- C. In the guest processing setting of the job, enable application-aware processing and add a pre-freeze script to the VM
- D. In the virtual machines setting of the job, add a script in the scripts tab under "Run the following script before the job:"
Answer: B
NEW QUESTION 33
An SMB customer installed Veeam Backup & Replication in a simple deployment. How can the customer comply with the 3-2-1 rule?
- A. Create a Scale-out Backup Repository with object storage in the public cloud used as the capacity tier leveraging move mode
- B. Create a Scale-out Backup Repository with object storage in the public cloud used as the capacity tier leveraging copy mode
- C. Create a backup to tape job to a local virtual tape library
- D. Copy the backups to a separate local NAS device
Answer: D
NEW QUESTION 34
A company has the following requirements:
Mission-critical VMs: hourly replication to disaster recovery site, daily backups of these VMs should be available at the disaster recovery site when required, the mission critical applications need to be available within 20 minutes.
Business-important VMs: daily backups should be stored at the disaster recovery site.
When required, the business-important applications need to be available within four hours.
Define the RPO and RTO for the company's disaster recovery site.
- A. Mission-critical VMs: RPO = 24 hours, RTO = four hours; business-important VMs: RPO
= 24 hours, RTO
= four hours - B. Mission-critical VMs: RPO = 60 minutes, RTO = one hour; business-important VMs:
RPO = 60 minutes, RTO = four hours - C. Mission-critical VMs: RPO = 60 minutes, RTO = 20 minutes; business-important VMs:
RPO = 24 hours, RTO = four hours - D. Mission-critical VMs: RPO = 24 hours, RTO = 20 minutes; business-important VMs:
RPO = 24 hours, RTO
= four hours
Answer: B
NEW QUESTION 35
......
Realistic DumpsTests VMCE_V10 Dumps PDF - 100% Passing Guarantee: https://www.dumpstests.com/VMCE_V10-latest-test-dumps.html