Tested Material Used To ISTQB-CTFL Test Engine Exam Questions in here [Apr-2024]
Penetration testers simulate ISTQB-CTFL exam PDF
NEW QUESTION # 47
Which of the following is true about Oracles?
- A. Oracles help in reproducing the irreproducible bugs
- B. Sometimes old version of a product can be used as an Oracle
- C. Oracles can be generated automatically using data generators
- D. Oracles are derived from the design
Answer: B
Explanation:
An oracle is a mechanism or source that can provide the expected result for a given test input or situation.
Sometimes old version of a product can be used as an oracle, if it is assumed that the old version behaves correctly for the test cases that are executed on the new version. This is also known as back-to-back testing.
Oracles do not help in reproducing the irreproducible bugs, as they only provide the expected results, not the actual results. Oracles are not derived from the design, but from the requirements or specifications. Oracles cannot be generated automatically using data generators, as data generators only provide test inputs, not test outputs. Verified References: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, page
9.
NEW QUESTION # 48
How can testing contribute to higher quality?
- A. Testing ensures that remaining defects are documented.
- B. Testing help to measure the quality of software.
- C. Testing removes errors in the software.
- D. Testing eliminates the risk with software.
Answer: B
Explanation:
Testing can contribute to higher quality by helping to measure the quality of software. Quality is defined as the degree to which a component or system satisfies specified requirements and customer or user needs and expectations. Testing is a process of evaluating a component or system by applying inputs and observing outputs, and comparing them with expected results. Testing can help to measure the quality of software by providing information on its functionality, performance, usability, security, reliability, etc. Testing can also help to identify and report defects in software, which can lead to improvement actions and quality assurance activities. The other options are not accurate descriptions of how testing can contribute to higher quality.
Testing does not ensure that remaining defects are documented, but rather that detecteddefects are reported.
Testing does not remove errors in software, but rather finds defects in software behavior or quality. Testing does not eliminate the risk with software, but rather assesses and manages the risk with software. Verified References: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, page 3.
NEW QUESTION # 49
The ISTOB glossary defines Quality Assurance as: "Pail or quality management focused on providing confidence that quality requirements will be fulfilled. Which of the following Is not one of the Quality Assurance activity?
- A. Requirements elicitation
- B. Functional Testing
- C. Performance Testing
- D. Defect analysis
Answer: B
Explanation:
Quality Assurance (QA) activities are focused on providing confidence that quality requirements will be fulfilled through planned and systematic processes. These activities are preventive in nature, aimed at ensuring quality is built into the product from the beginning.
Requirements elicitation (A) is part of the requirements engineering process and is concerned with gathering the needs and conditions to meet for a new or altered product.
Defect analysis (B) can be part of QA activities as it involves analyzing defects to prevent them in future development cycles.
Functional Testing (C) and Performance Testing (D) are types of dynamic testing, which are actually Quality Control activities rather than Quality Assurance. They are concerned with the identification of defects in the product, not with the processes to prevent defects.
Since the question asks for an activity that is NOT part of Quality Assurance, options A and B are incorrect because they can be part of QA activities. Between C and D, while both are dynamic testing activities, Functional Testing (C) is more directly related to verifying the functionality against specified requirements, which is more aligned with Quality Control. Therefore, C is the best answer.
NEW QUESTION # 50
You are testing the download process of a mobile phone application.
For which to the following capabilities to the system you need to design a nonfunctional test?
- A. It was easy to locate, download and install the application
- B. The application was correctly downloaded
- C. The application installed only after the user's approval
- D. The application created an installation log file in a given folder
Answer: A
Explanation:
This question asks for a non-functional aspect of testing the download process of a mobile application. Option A, "It was easy to locate, download and install the application," refers to usability, which is a non-functional quality attribute. Non-functional testing involves testing the system's attributes, such as usability, performance, reliability, etc., rather than specific behaviors or functions. Options B, "The application was correctly downloaded," C, "The application created an installation log file in a given folder," and D, "The application installed only after the user's approval," describe functional aspects, focusing on what the software does rather than how it performs or is experienced by the user.
NEW QUESTION # 51
A test engineer finds a defect while testing. After the developer has fixed the defect, the test engineer decides to re-run a complete section of the tests. Which of the following is correct?
- A. The lest engineer should not re-run the tests, as they have already been run, and results recorded.
- B. The test engineer should re-run the tests, because the defect shows that the test cases need to be updated.
- C. The test engineer should re-run the tests, in order to ensure that new defects have not been introduced by the fix.
- D. The test engineer should not re-run the tests, they should be part of the developer tests.
Answer: C
Explanation:
The test engineer should re-run the tests, in order to ensure that new defects have not been introduced by the fix. This is also known as regression testing, which is a type of testing that verifies that previously tested software still performs correctly after a change. Regression testing helps to detect any side effects or unintended consequences of a fix or a modification. The other options are incorrect reasons for re-running the tests. The test engineer should not re-run the tests, as they have already been run, and results recorded, because this ignores the possibility of new defects caused by the fix. The test engineer should not re-run the tests, they should be part of the developer tests, because this assumes that developer tests are sufficient and reliable, which may not be true. The test engineer should not re-run the tests, because the defect shows that the test cases need to be updated, because this does not address the impact of the fix on other test cases or functionalities. Verified Reference: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, page 41.
NEW QUESTION # 52
Which of the following is NOT a product risk?
- A. Failure-prone software is delivered
- B. Software does not perform the intended functions
- C. Problems in defining the right requirements
- D. Poor software usability
Answer: C
Explanation:
Problems in defining the right requirements is not a product risk, but rather a project risk. A product risk is a risk that affects the quality or performance of the software product itself, such as poor usability, failure-prone functionality, security vulnerabilities, compatibility issues, etc. A project risk is a risk that affects the management or delivery of the software project itself, such as unrealistic schedule, insufficient resources, unclear scope, changing requirements, etc. The other options are examples of product risks, as they relate to the software product's characteristics or features. Verified Reference: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, page 12.
NEW QUESTION # 53
Which of the following does MOT describe a reason why testing is necessary?
- A. The risks associated with delivering the system are far higher than the cost of testing
- B. The acquisition of test automation tools was based on the assumption that it will be used m all projects
- C. The customer decided that 100% branch coverage shall be achieved
- D. For avionics and pharmaceutical systems software testing is mandated by standards
Answer: B
Explanation:
Testing is necessary for various reasons, such as:
To detect defects and failures that may affect the quality, performance, reliability or security of a software product or system To verify that a software product or system meets its specified requirements, expectations and standards To validate that a software product or system fulfills its intended purpose and satisfies its stakeholders' needs To provide information and feedback about the status and risks of a software product or system To comply with regulations or contractual obligations that mandate testing for certain types of software products or systems The following statements describe some reasons why testing is necessary:
A) The customer decided that 100% branch coverage shall be achieved. This is a reason why testing is necessary, as it reflects a contractual obligation or a quality standard that requires testing to measure and achieve a certain level of code coverage.
C) For avionics and pharmaceutical systems software testing is mandated by standards. This is a reason why testing is necessary, as it reflects a regulation or a compliance requirement that mandates testing for certain types of software products or systems that have high safety or security risks.
D) The risks associated with delivering the system are far higher than the cost of testing. This is a reason why testing is necessary, as it reflects a risk-based approach that considers testing as an investment to reduce the probability and impact of potential failures or defects. The following statement does not describe a reason why testing is necessary:
B) The acquisition of test automation tools was based on the assumption that it will be used m all projects. This is not a reason why testing is necessary, as it reflects a business decision or a resource allocation that does not justify the need or purpose of testing. Test automation tools are not always suitable or beneficial for all projects, and testing can be performed with or without test automation tools. Verified Reference: [A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer], Chapter 1, page 5-6.
NEW QUESTION # 54
A company runs a pilot project for evaluation of a test automation tool. Which of the following is NOT a valid object of this pilot project?
- A. Decide upon standards for tool implementation
- B. Train all testers on using the tool
- C. Get familiar with the functionality and options of the tool
- D. Check haw the tool fits to the existing test processes
Answer: B
Explanation:
* A pilot project is a small-scale experiment or trial that is conducted to evaluate the feasibility, effectiveness, and suitability of a test automation tool before implementing it on a larger scale1.
* The objectives of a pilot project may vary depending on the context and scope of the test automation initiative, but some common ones are2:
* To get familiar with the functionality and options of the tool
* To check how the tool fits to the existing test processes and environment
* To assess the benefits and challenges of using the tool
* To decide upon standards and guidelines for tool implementation and usage
* To estimate the costs and resources required for tool deployment and maintenance
* Therefore, option C is not a valid objective of a pilot project, as it is not necessary to train all testers on using the tool at this stage. Training all testers on using the tool would be more appropriate after the tool has been selected and approved for full-scale implementation, and after the standards and guidelines have been established. Training all testers on using the tool during the pilot project would be inefficient, costly, and premature, as the tool may not be suitable or effective for the intended purpose, or may be replaced by another tool later.
References:
* 1: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 82
* 2: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 83
* : ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 84
* : ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 85
NEW QUESTION # 55
What is test oracle?
- A. The source of input conditions
- B. The source for the actual results
- C. The source of expected results
- D. The source of lest objectives
Answer: C
Explanation:
A test oracle is a mechanism or principle that can be used to determine whether the observed behavior or output of a system under test is correct or not1. A test oracle can be based on various sources of expected results, such as specifications, user expectations, previous versions, comparable systems, etc2. References:
ISTQB Certified Tester Foundation Level (CTFL) v4.0 Syllabus, Section 1.2.1, Page 91; ISTQB Glossary of Testing Terms, Version 4.0, Page 332.
NEW QUESTION # 56
Which of the following statements about decision tables are TRUE?
I Generally, decision tables are generated for low risk test items.
II Test cases derived from decision tables can be used for component tests.
III Several test cases can be selected for each column of the decision table.
IV The conditions in the decision table represent negative tests generally.
- A. I. Ill
- B. II. Ill
- C. Generally, decision tables are generated for low risk test items. Decision tables are not related to risk level, but rather to complexity level. Decision tables are generated for test items that have complex logic or multiple conditions and actions that need to be tested.
- D. II. IV
- E. I. IV
Answer: B
Explanation:
IV. The conditions in the decision table represent negative tests generally. The conditions in the decision table represent both positive and negative tests, depending on whether they are valid or invalid inputs for the test item. Verified Reference: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, Chapter 4, page 42-43.
Explanation:
A decision table is a technique that shows combinations of inputs and/or stimuli (causes) with their associated outputs and/or actions (effects). A decision table consists of four quadrants: conditions (inputs), actions (outputs), condition entries (values) and action entries (results). The following statements about decision tables are true:
II. Test cases derived from decision tables can be used for component tests. Decision tables can be used to test components that have multiple inputs and outputs that depend on logical combinations of conditions. Decision tables can help cover all possible combinations or scenarios in a systematic way.
III. Several test cases can be selected for each column of the decision table. A column of a decision table represents a unique combination of condition entries and action entries. Several test cases can be selected for each column by varying other input values or expected results that are not part of the decision table. The following statements about decision tables are false:
NEW QUESTION # 57
Which of the following is a correct reason to apply test automation?
- A. When it is cheap to buy test automation tools
- B. When it is easy to automate
- C. When there are a lot of repetitive testing tasks
- D. When a new test automation tool is launched
Answer: C
Explanation:
A correct reason to apply test automation is when there are a lot of repetitive testing tasks. Test automation is the use of software tools or scripts to perform or support testing activities, such as test case execution, test result comparison, test data generation, etc. Test automation can be beneficial when there are a lot of repetitive testing tasks that need to be performed frequently or consistently, such as regression testing, performance testing, load testing, etc. Test automation can help to save time and effort, increase reliability and accuracy, and improve coverage and efficiency of testing. The other options are not correct reasons to apply test automation. When a new test automation tool is launched is not a reason to apply test automation, but rather a factor for choosing a test automation tool. When it is easy to automate is not a reason to apply test automation, but rather a factor for evaluating the feasibility of test automation. When it is cheap to buy test automation tools is not a reason to apply test automation, but rather a factor for estimating the cost and benefit of test automation. Verified References: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, page 10.
NEW QUESTION # 58
Consider the following statements about risk-based testing.
I) Risk-based testing has the objective to reduce the level of protect risks.
II) Tests should be prioritized to find tie critical detects as early as possible.
III) Non-testing activities may also help to reduce risk
IV) Risks have to bereassessedon a regular basis.
V) The project stakeholders can give useful input to determine the risks
- A. I III IV and V are true. II is false.
- B. C. I, II and IV are true.IIIand V are false.
- C. II, IIIIVandVarecorrect. I isfalse.
- D. II, Ill and V are true.1antsIv are false.
Answer: C
Explanation:
The following statements about risk-based testing are correct:
* II) Tests should be prioritized to find tie critical detects as early as possible. Risk-based testing involves prioritizing tests based on risk level, which reflects both the likelihood and impact of defects or failures.
Tests with higher risk level should be executed earlier than tests with lower risk level, in order to find and fix critical defects as soon as possible.
* III) Non-testing activities may also help to reduce risk. Risk-based testing does not only involve testing activities, but also other activities that can help mitigate risks, such as reviews, inspections, audits,
* simulations or prototyping.
NEW QUESTION # 59
Which of the following is true about Oracles?
- A. Oracles help in reproducing the irreproducible bugs
- B. Sometimes old version of a product can be used as an Oracle
- C. Oracles can be generated automatically using data generators
- D. Oracles are derived from the design
Answer: B
Explanation:
An oracle is a mechanism or source that can provide the expected result for a given test input or situation. Sometimes old version of a product can be used as an oracle, if it is assumed that the old version behaves correctly for the test cases that are executed on the new version. This is also known as back-to-back testing. Oracles do not help in reproducing the irreproducible bugs, as they only provide the expected results, not the actual results. Oracles are not derived from the design, but from the requirements or specifications. Oracles cannot be generated automatically using data generators, as data generators only provide test inputs, not test outputs. Verified Reference: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, page 9.
NEW QUESTION # 60
A QA manager of a start-up company needs to implement within a week a low cost incident management tool.
Which of the following is the best option?
- A. Manage the incidents through E-mails and phone calls
- B. Document incidents on a large board in the lab
- C. Purchase and deploy an incident management tool
- D. Manage the incidents in a spreadsheet posted on the intranet
Answer: D
Explanation:
An incident is any event that occurs during testing that requires investigation. An incident management tool is a software tool that supports recording and tracking incidents throughout their life cycle. A QA manager of a start-up company needs to implement within a week a low cost incident management tool. The best option for this case is to manage the incidents in a spreadsheet posted on the intranet. This option has several advantages over other options:
* It is low cost, as it does not require purchasing any additional software or hardware.
* It is easy to implement within a week, as it does not require installing or configuring any complex software or hardware.
* It is accessible and transparent, as it can be viewed and updated by anyone who has access to the intranet.
* It is structured and organized, as it can store and display various information about incidents, such as identifier, summary, description, severity, priority, status, resolution, etc. The other options are not suitable for this case, as they have several disadvantages over the chosen option:
* Documenting incidents on a large board in the lab is not a good option, as it is not accessible or transparent to anyone who is not physically present in the lab. It is also not structured or organized, as it may not store or display all the necessary information about incidents.
* Purchasing and deploying an incident management tool is not a good option, as it is not low cost or easy to implement within a week. It may require spending a significant amount of money and time on acquiring, installing and configuring the software or hardware.
* Managing the incidents through emails and phone calls is not a good option, as it is not structured or organized. It may lead to confusion, inconsistency or loss of information about incidents. Verified References: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, Chapter 3, page
32-33.
NEW QUESTION # 61
Why should you choose a test technique?
- A. Because you need to match the way you test to the content of the product under test
- B. Because of the time constraints that usually accompany a test project
- C. Because choosing a test technique is a common practice in software testing
- D. Because this way you cover the full scope of the product's functionality
Answer: A
Explanation:
You should choose a test technique because you need to match the way you test to the content of the product under test. A test technique is a method or process for deriving and selecting test cases based on some criteria or rules. Different test techniques are suitable for different types of software products, depending on their characteristics, functionalities, requirements, specifications, risks, etc. Choosing a test technique helps to ensure that the test cases are relevant, effective, and efficient for the product under test. The other options are not correct reasons to choose a test technique. Time constraints are not a factor for choosing a test technique, but rather for prioritizing or optimizing testing activities. Covering the full scope of the product's functionality is not a guarantee of choosing a test technique, but rather a goal of testing. Choosing a test technique is not a common practice in software testing, but rather a professional skill and responsibility. Verified References: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, page 31.
NEW QUESTION # 62
Which of the following statements about decision tables are TRUE?
I) Generally, decision tables are generated for low risk test items.
II) Test cases derived from decision tables can be used for component tests.
III) Several test cases can be selected for each column of the decision table.
IV) The conditions in the decision table represent negative tests generally.
- A. II, Ill
- B. I, IV
- C. I, Ill
- D. II, IV
Answer: A
Explanation:
A decision table is a technique that shows combinations of inputs and/or stimuli (causes) with their associated outputs and/or actions (effects). A decision table consists of four quadrants: conditions (inputs), actions (outputs), condition entries (values) and action entries (results). The following statements about decision tables are true:
II, Test cases derived from decision tables can be used for component tests. Decision tables can be used to test components that have multiple inputs and outputs that depend on logical combinations of conditions. Decision tables can help cover all possible combinations or scenarios in a systematic way.
III, Several test cases can be selected for each column of the decision table. A column of a decision table represents a unique combination of condition entries and action entries. Several test cases can be selected for each column by varying other input values or expected results that are not part of the decision table. The following statements about decision tables are false:
I, Generally, decision tables are generated for low risk test items. Decision tables are not related to risk level, but rather to complexity level. Decision tables are generated for test items that have complex logic or multiple conditions and actions that need to be tested.
IV, The conditions in the decision table represent negative tests generally. The conditions in the decision table represent both positive and negative tests, depending on whether they are valid or invalid inputs for the test item. Verified Reference: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, Chapter 4, page 42-43.
NEW QUESTION # 63
Which of the following is an example of black-box dynamic testing?
- A. Checking memory leaks for a program by executing it
- B. Functional Testing
- C. Coverage analysis
- D. Code inspection
Answer: B
Explanation:
Functional testing is an example of black-box dynamic testing. Black-box testing (also known as specification-based testing) is a type of testing that does not consider the internal structure or implementation of the system under test, but rather its external behavior or functionality. Dynamic testing is a type of testing that involves executing the system under test with various inputs and observing its outputs. Functional testing is a type of black-box dynamic testing that verifies that the system under test performs its intended functions according to its requirements or specifications. Functional testing can be performed at various levels and scopes depending on the objectives and criteria of testing. The other options are not examples of black-box dynamic testing. Code inspection is an example of white-box static testing. White-box testing (also known as structure-based testing) is a type of testing that considers the internal structure or implementation of the system under test. Static testing is a type of testing that does not involve executing the system under test, but rather analyzing it for defects, errors, or violations of standards. Code inspection is a type of white-box static testing that involves examining the source code of the system under test for quality, readability, maintainability, etc.
Checking memory leaks for a program by executing it is an example of white-box dynamic testing. Memory leaks are defects that occur when a program fails to release memory that it has allocated but no longer needs.
Checking memory leaks for a program by executing it requires knowledge and access to the internal structure or implementation of the program, such as memory allocation and deallocation mechanisms, pointers, references, etc. Coverage analysis is an example of white-box static testing. Coverage analysis is a technique that measures how much of the code or structure of the system under test has been exercised by a test suite.
Coverage analysis requires knowledge and access to the internal structure or implementation of the system under test, such as statements, branches, paths, conditions, etc. Verified References: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, page 7.
NEW QUESTION # 64
Which of the following should be included in a test status report?
I Estimation details
II Total number of open and closed defects
III Actual effort spent
IV Defect reports
V Number of executed, failed, blocked tests
- A. II, III
- B. I. II. IV
- C. II, III.V
- D. III.V
Answer: C
Explanation:
The following should be included in a test status report: total number of open and closed defects, actual effort spent, and number of executed, failed, and blocked tests. A test status report is a document that provides information on the results and status of testing activities for a given period or phase. A test status report should include information that is relevant, accurate, and timely for the intended audience and purpose. Some of the information that should be included in a test status report are: total number of open and closed defects, which can indicate the defect trend and defect density of the software product; actual effort spent, which can indicate the productivity and efficiency of the testing process; number of executed, failed, and blocked tests, which can indicate the test progress and test coverage of the software product. The following should not be included in a test status report: estimation details, defect reports, and impact analysis. Estimation details are not part of a test status report, but rather part of a test plan or a test estimation document. Estimation details provide information on the expected time, resources, and costs for testing activities, not on the actual results or status of testing activities. Defect reports are not part of a test status report, but rather separate documents that provide detailed information on individual defects found during testing. Defect reports include information such as defect description, defect severity, defect priority, defect status, defect resolution, etc. Defect reports can be referenced or summarized in a test status report, but not included in full. Impact analysis is not part of a test status report, but rather part of a risk assessment or prioritization process. Impact analysis provides information on the potential effects or consequences of a change or a defect on the software product or project. Impact analysis can be used to evaluate the amount or scope of testing to be performed, but not to report the results or status of testing activities. Verified Reference: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, page 141.
NEW QUESTION # 65
Which of the following applications will be the MOST suitable for testing by Use Cases
- A. The ability of an Anti virus package to detect and quarantine a new threat
- B. Suitability and performance of a Multi media (audio video based) system to a new operating system
- C. A billing system used to calculate monthly charge based or large number of subscribers parameters
- D. Accuracy and usability of a new Navigation system compared with previous system
Answer: D
Explanation:
A new navigation system compared with a previous system is the most suitable application for testing by use cases, because it involves a high level of interaction between the user and the system, and the expected behavior and outcomes of the system are based on the user's needs and goals. Use cases can help to specify the functional requirements of the new navigation system, such as the ability to enter a destination, select a route, follow the directions, receive alerts, etc. Use cases can also help to compare the accuracy and usability of the new system with the previous system, by defining the success and failure scenarios, the preconditions and postconditions, and the alternative flows of each use case. Use cases can also help to design and execute test cases that cover the main and exceptional paths of each use case, and to verify the satisfaction of the user's expectations.
The other options are not the most suitable applications for testing by use cases, because they do not involve a high level of interaction between the user and the system, or the expected behavior and outcomes of the system are not based on the user's needs and goals. A billing system used to calculate monthly charge based on a large number of subscriber parameters is more suitable for testing by data-driven testing, which is a technique for testing the functionality and performance of a system or component by using a large set of input and output data. The ability of an antivirus package to detect and quarantine a new threat is more suitable for testing by exploratory testing, which is a technique for testing the functionality and security of a system or component by using an informal and flexible approach, based on the tester's experience and intuition. The suitability and performance of a multimedia (audio video based) system to a new operating system is more suitable for testing by compatibility testing, which is a technique for testing the functionality and performance of a system or component by using different hardware, software, or network environments. Reference = CTFL 4.0 Syllabus, Section 3.1.1, page 28-29; Section 4.1.1, page 44-45; Section 4.2.1, page 47-48.
NEW QUESTION # 66
A company runs a pilot project for evaluation of a test automation tool. Which of the following is NOT a valid object of this pilot project?
- A. Decide upon standards for tool implementation
- B. Train all testers on using the tool
- C. Get familiar with the functionality and options of the tool
- D. Check haw the tool fits to the existing test processes
Answer: B
Explanation:
A pilot project is a small-scale experiment or trial that is conducted to evaluate the feasibility, effectiveness, and suitability of a test automation tool before implementing it on a larger scale1.
The objectives of a pilot project may vary depending on the context and scope of the test automation initiative, but some common ones are2:
To get familiar with the functionality and options of the tool
To check how the tool fits to the existing test processes and environment To assess the benefits and challenges of using the tool To decide upon standards and guidelines for tool implementation and usage To estimate the costs and resources required for tool deployment and maintenance Therefore, option C is not a valid objective of a pilot project, as it is not necessary to train all testers on using the tool at this stage. Training all testers on using the tool would be more appropriate after the tool has been selected and approved for full-scale implementation, and after the standards and guidelines have been established. Training all testers on using the tool during the pilot project would be inefficient, costly, and premature, as the tool may not be suitable or effective for the intended purpose, or may be replaced by another tool later.
Reference:
1: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 82
2: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 83
3: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 84
4: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 85
NEW QUESTION # 67
......
Authentic Best resources for ISTQB-CTFL Online Practice Exam: https://www.dumpstests.com/ISTQB-CTFL-latest-test-dumps.html
Get the superior quality ISTQB-CTFL Dumps with explanations waiting just for you, get it now: https://drive.google.com/open?id=1DcN4ZHmJB-3K-KQfbGHWbowBK-a56dlW