[Oct-2021] Updated Cisco 300-430 Dumps – PDF & Online Engine
300-430.pdf - Questions Answers PDF Sample Questions Reliable
Security for Wireless Client Connectivity
In the framework of this section (20%), the applicants have to demonstrate their proficiency in the following:
- Configuring the client profile on ISE and WLC;
- Implementing BYOD and guests, including CWA with ISE, native supplicant provisioning with ISE, LWA with WLC or ISE, and certificate provisioning on controllers;
- Implementing the identity-based networking on various wireless architectures;
- Implementing AAA & 802.1X on various wireless architectures and ISE.
Difficulty in Writing Cisco 300-430: Implementing Cisco Enterprise Wireless Networks Exam
The Implementation of the Cisco wireless networks (300-430) certification is one of the most important certifications that applicants can have on their CV. One of the biggest challenges for many candidates is to use the Internet to find so many details that make it impossible for them to believe, which would be beneficial for them to choose the correct 300-430 practice test.
However, applicants can clear the examination with the correct concentration and the correct preparatory material. DumpsTests have the most up to date 300-430 dumps that allows a clear understanding of the pattern in questions raised by these dumping aspirants with real certification. The experts track qualification questions for all the changes in the course. Certification problems also require realistic research, which is an ideal forum to test the knowledge that is collected. For the study content, refer to the links below.
NEW QUESTION 61
Which two steps are needed to complete integration of the MSE to Cisco Prime Infrastructure and be able to track the location of clients/rogues on maps? (Choose two.)
- A. Apply a valid license for location tracking.
- B. Add the MSE to Cisco Prime Infrastructure using the CLI credentials.
- C. Add the MSE to Cisco Prime Infrastructure using the Cisco Prime Infrastructure communication credentials configured during set up.
- D. Apply a valid license for Wireless Intrusion Prevention System.
- E. Synchronize access points with the MSE.
Answer: A,C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/33/user/guide/bk_CiscoPrimeInfrastructur
NEW QUESTION 62
An engineer is implementing RADIUS to restrict administrative control to the network with the WLC management IP address of 192.168.1.10 and an AP subnet of 192.168.2.0/24. Which entry does the engineer define in the RADIUS server?
- A. NAS entry of the virtual interface and the network range 192 168 2 0/255 255 255 0
- B. WLC roles for commands and the network range 192 168 1 0/255 255 255.0
- C. shared secret defined on the WLC and the network range 192 168 1 0/255 255 254.0
Answer: A
NEW QUESTION 63
A network engineer is designing a high capacity WLAN for a conference area. The enterprise is concerned about non-business traffic consuming excessive bandwidth and impacting performance. What can be used in the design to allow the controller to block or throttle applications?
- A. AVC
- B. CMX
- C. DSCP
- D. RXSOP
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 64 
Refer to the exhibit. The image shows a packet capture that was taken at the CLI of the Cisco CMX server. It shows UDP traffic from the WLC coming into the server. What does the capture prove?
- A. The Cisco CMX server receives NetFlow data from the WLC.
- B. The Cisco CMX server receives Angle-of-Arrival data from the WLC.
- C. The Cisco CMX server receives SNMP traffic from the WLC.
- D. The Cisco CMX server receives NMSP traffic from the WLC.
Answer: B
NEW QUESTION 65
What must be configured on ISE version 2.1 BYOD when using Single SSID?
- A. no authentication
- B. open authentication
- C. WPA2
- D. 802.1x
Answer: C
Explanation:
NEW QUESTION 66
An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 security options are supported in this environment? (Choose two.)
- A. Static WEP
- B. WPA+WPA2
- C. 802.1X
- D. CKIP
- E. Static WEP + 802.1X
Answer: A,B
Explanation:
NEW QUESTION 67
A wireless engineer needs to implement client tracking. Which method does the angle of arrival use to determine the location of a wireless device?
- A. angle of incidence
- B. time distance of arrival
- C. received signal strength
- D. triangulation
Answer: A
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/WiFiLBS-DG/wifich2.html
NEW QUESTION 68
An engineer wants the wireless voice traffic class of service to be used to determine the queue order for packets received, and then have the differentiated services code point set to match when it is resent to another port on the switch. Which configuration is required in the network?
- A. msl qos trust dscp configured on the controller switch port
- B. msl qos trust cos configured on the controller switch port
- C. WMM set to required on the WLAN
- D. Platinum QoS configured on the WLAN
Answer: A
NEW QUESTION 69
An engineer wants the wireless voice traffic class of service to be used to determine the queue order for packets received, and then have the differentiated services code point set to match when it is resent to another port on the switch. Which configuration is required in the network?
- A. mls qos trust cos configured on the controller switch port
- B. mls qos trust dscp configured on the controller switch port
- C. WMM set to required on the WLAN
- D. Platinum QoS configured on the WLAN
Answer: B
Explanation:
NEW QUESTION 70
An engineer configured a Cisco AireOS controller with two TACACS+ servers. The engineer notices that whenthe primary TACACS+ server fails, the WLC starts using the secondary server as expected, but the WLC doesnot use the primary server again until the secondary server fails or the controller is rebooted. Which cause ofthis issue is true?
- A. Fallback is enabled
- B. DNS query is disabled
- C. Fallback is disabled
- D. DNS query is enabled
Answer: C
NEW QUESTION 71
Which AP model of the Cisco Aironet Active Sensor is used with Cisco DNA Center?
- A. 3800s
- B. 1800s
- C. 4800i
- D. 3600e
Answer: B
Explanation:
https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-active-sensor/guide-c07-743929.html
NEW QUESTION 72
Which QoS level is recommended for guest services?
- A. platinum
- B. gold
- C. bronze
- D. silver
Answer: C
Explanation:
NEW QUESTION 73
The security learn is concerned about the access to all network devices, including the Cisco WLC. To permit only the admin subnet to have access to management, a CPU ACL is created and applied. However, guest users cannot get to the web portal. What must be configured to permit only admins to have access?
- A. Management traffic from the guest network must be configured on the ACL rules.
- B. The guest portal must be configured on the CPU ACLs on the Cisco WLC.
- C. Access to Cisco ISE must be allowed on the pre authentication ACL.
- D. Traffic toward the virtual interface must be permitted.
Answer: C
Explanation:
NEW QUESTION 74
Refer to the exhibit.
A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101 and 10.3.10.102. All BYOD devices connecting to WLAN on VLAN63 have been incorrectly profiled and areassigned as unknown profiled endpoints. Which action efficiently rectifies the issue according to Ciscorecommendations?
- A. Disable DHCP proxy on the Cisco WLC and run the ip helper-address command under the VLANinterface to point to DHCP and the two ISE servers.
- B. Keep DHCP proxy enabled on the Cisco WLC and define helper-address under the VLAN interface to pointto the two ISE servers.
- C. Nothing needed to be added on the Cisco WLC or VLAN interface. The ISE configuration must be fixed.
- D. Disable DHCP proxy on the Cisco WLC.
Answer: A
NEW QUESTION 75
An engineer must implement Cisco Identity-Based Networking Services at a remote site using ISE to dynamically assign groups of users to specific IP subnets. If the subnet assigned to a client is available at the remote site, then traffic must be offloaded locally, and subnets are unavailable at the remote site must be tunneled back to the WLC. Which feature meets these requirements?
- A. central DHCP processing
- B. VLAN-based central switching
- C. FlexConnect local authentication
- D. learn client IP address
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/Enterprise-Mobility-8-5-Design-Guide/Enterprise_Mobility_8-5_Deployment_Guide/ch7_HREA.html
NEW QUESTION 76
......
Topics of Cisco 300-430 Exam
The Cisco 300-430 exam evaluates the competence of the candidates in implementing the wireless network. The subject areas that are measured in the delivery of this test include QoS, FlexConnect, Multicast, monitoring, advanced location services, as well as device hardening & client connectivity security. The details of these topics are enumerated below:
FlexConnect
This domain makes up about 15% of the exam content and measures the proficiency of the students in specific areas. They will be required to demonstrate their skills in the following tasks:
- Deploying the capabilities of FlexConnect, such as FlexConnect groups & roaming, Smart AP image upgrade, split-tunnel and fault tolerance, and Flex ACL & VLAN-based central switching;
- Deploying the components of FlexConnect, including switching & operating modes;
- Implementing Office Extend.
Cisco 300-430 Dumps PDF Are going to be The Best Score: https://www.dumpstests.com/300-430-latest-test-dumps.html
CCNP Enterprise 300-430 Exam and Certification Test Engine: https://drive.google.com/open?id=1k7rVX3XjggAiukNLb4RBDWHjR2v3nmoh