NSE6_FWF-6.4 Braindumps PDF, Fortinet NSE6_FWF-6.4 Exam Cram
New 2023 NSE6_FWF-6.4 Sample Questions Reliable NSE6_FWF-6.4 Test Engine
The Fortinet NSE6_FWF-6.4 exam is designed to validate the skills and knowledge of network security professionals in implementing and managing secure wireless LAN solutions using Fortinet products. This certification exam is one of the requirements for the Fortinet Network Security Expert (NSE) program, which is a comprehensive training and certification program for network security professionals. The NSE6_FWF-6.4 exam focuses on topics such as Fortinet Secure WLAN concepts, WLAN hardware and software, FortiAP deployment, and WLAN security configuration.
The Fortinet NSE6_FWF-6.4 exam is one of the most popular and highly sought-after exams for individuals looking to advance their career in wireless networking. This exam is designed to test the knowledge and skills of candidates in the field of wireless networking and security. Passing this exam demonstrates that the candidate has a thorough understanding of the concepts, technologies, and best practices required to design, configure, and manage secure wireless LANs.
NEW QUESTION # 10
Refer to the exhibits.
Exhibit A
Exhibit B
A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)
- A. Disable intra-vap-privacy for the Authors vap-wireless network
- B. For both interfaces in the wtp-profile, configure vap-all to be manual
- C. Increase the transmission power of the AP radio interfaces
- D. For both interfaces in the wtp-profile, configure set vaps to be "Authors"
Answer: A,B
NEW QUESTION # 11
Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)
- A. A VAP configured to authenticate using a radius server
- B. A VAP configured to authenticate locally on FortiGate
- C. A VAP configured for WPA2 or 3 Enterprise
- D. A VAP configured for captive portal authentication
Answer: A,C
Explanation:
In the SSID choose WPA2-Enterprise authentication.
WSSO is RADIUS-based authentication that passes the user's user group memberships to the FortiGate.
NEW QUESTION # 12
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
- A. Wireless network security must be set to open
- B. DTLS encryption on wireless traffic must be turned off
- C. Two wireless APs must be sending data
- D. SQL services must be running
Answer: D
NEW QUESTION # 13
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
- A. Wireless network security must be set to open
- B. DTLS encryption on wireless traffic must be turned off
- C. Two wireless APs must be sending data
- D. SQL services must be running
Answer: C
Explanation:
FortiPresence VM is deployed locally on your site and consists of two virtual machines. All the analytics data collected and computed resides locally on the VMs.
NEW QUESTION # 14
Part of the location service registration process is to link FortiAPs in FortiPresence.
Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)
- A. FortiAP Cloud
- B. FortiSwitch
- C. AP Manager
- D. FortiGate
Answer: A,D
Explanation:
FortiGate, FortiCloud wireless access points (send visitor data in the form of station reports directly to FortiPresence)
NEW QUESTION # 15
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user usage stats
- B. Provides real-time insight into user movements
- C. Provides real-time insight into user purchase activity
- D. Provides real-time insight into user online activity
Answer: B
NEW QUESTION # 16
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)
- A. Social networks authentication
- B. Hardware security token authentication
- C. Short message service authentication
- D. Software security token authentication
Answer: A,C
NEW QUESTION # 17
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Project information phase
- B. Installation phase
- C. Hardware selection phase
- D. Site survey phase
Answer: A,D
NEW QUESTION # 18
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user usage stats
- B. Provides real-time insight into user movements
- C. Provides real-time insight into user purchase activity
- D. Provides real-time insight into user online activity
Answer: A
Explanation:
This geographical data analysis provides real-time insights into user behavior.
NEW QUESTION # 19
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
- B. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
- C. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
- D. Areas with the signal strength weaker than -68 dB are cut out of the map
Answer: C
NEW QUESTION # 20
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)
- A. Social networks authentication
- B. Hardware security token authentication
- C. Short message service authentication
- D. Software security token authentication
Answer: A,B
Explanation:
This information along with the social network authentication logins with Facebook, Google, Instagram, LinkedIn, or FortiPresence using your WiFi.
Captive Portal configurations for social media logins and internet access. You can add and manage sites using the integrated Google maps and manoeuvre your hardware infrastructure easily.
NEW QUESTION # 21
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. WPA3 Enterprise
- B. WPA2 Personal and radius MAC filtering
- C. WPA2 Enterprise
- D. Open, with radius MAC filtering
Answer: B
NEW QUESTION # 22
Six APs are located in a remotely based branch office and are managed by a centrally hosted FortiGate. Multiple wireless users frequently connect and roam between the APs in the remote office.
The network they connect to, is secured with WPA2-PSK. As currently configured, the WAN connection between the branch office and the centrally hosted FortiGate is unreliable.
Which configuration would enable the most reliable wireless connectivity for the remote clients?
- A. Configure a bridge mode wireless network and enable the Local standalone configuration option
- B. Configure a bridge mode wireless network and enable the Local authentication configuration option
- C. Install supported FortiAP and configure a bridge mode wireless network
- D. Configure a tunnel mode wireless network and enable split tunneling to the local network
Answer: D
NEW QUESTION # 23
Which factor is the best indicator of wireless client connection quality?
- A. Downstream link rate, the connection rate for the AP to the client
- B. The receive signal strength (RSS) of the client at the AP
- C. The channel utilization of the channel the client is using
- D. Upstream link rate, the connection rate for the client to the AP
Answer: B
Explanation:
SSI, or "Received Signal Strength Indicator," is a measurement of how well your device can hear a signal from an access point or router. It's a value that is useful for determining if you have enough signal to get a good wireless connection.
NEW QUESTION # 24
Which two statements about background rogue scanning are correct? (Choose two.)
- A. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- B. Background rogue scanning requires DARRP to be enabled on the AP instance
- C. A dedicated radio configured for background scanning can support the connection of wireless clients
- D. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
Answer: A,B
NEW QUESTION # 25
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Enable frequency handoff on the AP to band steer clients
- B. Install another AP in the reception area to improve available bandwidth
- C. Reduce the number of wireless networks being broadcast by the AP
- D. Increase the transmission power of the AP radios
Answer: D
NEW QUESTION # 26
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. WPA3 Enterprise
- B. WPA2 Enterprise
- C. WPA2 Personal and radius MAC filtering
- D. Open, with radius MAC filtering
Answer: B
Explanation:
Best security option is WPA2-AES.
NEW QUESTION # 27
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)
- A. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
- B. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- C. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- D. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
Answer: C,D
NEW QUESTION # 28
......
Feel Fortinet NSE6_FWF-6.4 Dumps PDF Will likely be The best Option: https://www.dumpstests.com/NSE6_FWF-6.4-latest-test-dumps.html
NSE6_FWF-6.4 exam torrent Fortinet study guide: https://drive.google.com/open?id=1sq5PA1XKxTKX4IyQIHguwIp67-Mzu4tT