Most UptoDate AVIXA CTS-D Exam Dumps PDF 2025
100% Free AVIXA Certification CTS-D Dumps PDF Demo Cert Guide Cover
AVIXA CTS-D Exam Certification Details:
| Books / Training | Candidate Handbook |
| Non-Member Exam Price | $575(USD) |
| Exam Name | AVIXA Certified Technology Specialist - Design (CTS-D) |
| Duration | 180 mins |
| Number of Questions | 135 |
| Exam Code | CTS-D |
| Schedule Exam | Pearson VUE |
| Sample Questions | AVIXA CTS-D Sample Questions |
| MemberExam Price | $475(USD) |
AVIXA CTS-D - Design Exam Syllabus Topics:
| Topic | Weight |
|---|---|
| Duty A: Conducting a Needs Assessment | 16.8% |
| Task 1: Identify Decision-makers and Stakeholders | 1.6% |
| Task 2: Identify Skill Level of End Users | 2.4% |
| Task 3: Educate AV Clients | 1.6% |
| Task 4: Review Client Technology Master Plan | 3.2% |
| Task 5: Identify Client Expectations | 4% |
| Task 6: Identify Scope of Work | 4% |
| Duty B:Coordinating with Other Professionals to Develop Project Documentation | 23.2% |
| Task 1: Review A/E (architectural and engineering) drawings | 4% |
| Task 2: Coordinate with architectural/interior design professionals | 4% |
| Task 3: Coordinate with Mechanical Professionals | 1.6% |
| Task 4: Coordinate with Structural Professionals | 1.6% |
| Task 5: Coordinate with Electrical Professionals | 3.2% |
| Task 6: Coordinate with lighting professionals | 2.4% |
NEW QUESTION # 90
Under what circumstance would a designer need to generate a Request for Information (RFI) form on a project?
Response:
- A. There is a mis-match between a diagram and a description on the project
- B. There is a site issue having to do with the concrete footers
- C. The owner has approved a change in types of flat panel displays
- D. The general contractor has changed the project schedule and timeline
Answer: A
NEW QUESTION # 91
When creating a schematic diagram of audio signal flow for a project, what must be included in the diagram?
Response:
- A. Inputs, outputs, equipment rack locations, ceiling venting
- B. Construction materials, wall panels, acoustic tiles
- C. Microphones, mixers, switchers, routers, and processors
- D. Conduit runs, pull boxes, bends
Answer: C
NEW QUESTION # 92
One way to plan for future AV expansion in the system is to:
Response:
- A. Set up initial signal paths and switchers with extra inputs
- B. Run extra lighting to unused rooms for future use
- C. Install extra speakers even though they are not yet needed[AK7]
- D. Purchase generators for extra electrical capacity for future use
Answer: A
NEW QUESTION # 93
To assure optimum opportunity for end user training on the systems and equipment, training group size should be no larger than:
Note: Answers to this question are not verified by our experts, please study yourself and select the appropriate answers.
Contribute: Please send the correct answers with reference text/link on [email protected] to get up to 50% cashback.
Response:
- A. 20 people
- B. 6 people
- C. 10 people
- D. 25 people
Answer: A
NEW QUESTION # 94
What is a common way to track a project?
Response:
- A. Work breakdown structure
- B. Spreadsheet
- C. Statement of work
- D. Note taking
Answer: A
NEW QUESTION # 95
What is the best place to install a 60 lb (27.22 kg) audio amplifier in a freestanding equipment rack?
Response:
- A. Top of the rack.
- B. Bottom of the rack.
- C. The location is irrelevant.
- D. Middle of the rack.
Answer: B
NEW QUESTION # 96
Which of the following would not be considered part of the system drawings for an AV design?
Response:
- A. Color schemes
- B. Control system flows
- C. Rack elevations
- D. DSP settings
Answer: A
NEW QUESTION # 97
Under what circumstances might you advise a client to implement a multi-point video conferencing control unit?
Response:
- A. For international video conferencing
- B. For distance learning to 8 classrooms
- C. For video streaming a conference
- D. For connecting 2 codecs from different manufacturers
Answer: B
NEW QUESTION # 98
The main considerations when selecting a cable shield are:
Response:
- A. Coverage, flexibility, and frequency range
- B. Materials, permeability, and conductors
- C. Cable types, gauge, and interference
- D. Impedance, flexibility, and materials
Answer: A
NEW QUESTION # 99
Stereo loudspeaker systems typically use what type of signal?
Response:
- A. High gain
- B. Low gain
- C. Analog
- D. RGBH
Answer: C
NEW QUESTION # 100
Which of the following statements apply to unicast streaming?
Response:
- A. It consumes more bandwidth the more people who need to view the stream.
- B. It uses special IP addresses assigned by the Internet Assigned Numbers Authority.
- C. It uses group-management protocols to control streaming channels.
- D. It requires special routers called rendezvous points.
Answer: A
NEW QUESTION # 101
Where will the floor box dimensional and exact installation information be found?
Response:
- A. Conduit riser diagrams
- B. Floorplan drawings
- C. Detail drawings
- D. Electrical coordination drawings
Answer: C
NEW QUESTION # 102
For a handheld vocal microphone, you might want set the input gain for at least __________.
Response:
- A. 10 dB
- B. 35 dB
- C. 60 dB
- D. 20 dB
Answer: B
NEW QUESTION # 103
After a project has been completed and verified, the AV team should hand over comprehensive documentation, including __________.
Response:
- A. Drawings of record
- B. A business card
- C. Test patterns
- D. Copies of relevant standards
Answer: A
NEW QUESTION # 104
What is the required bandwidth for a 4:4:4 computer image (1280 × 1024, 8 bits at 80 Hz)?
Response:
- A. 3 Gbps
- B. 2 Gbps
- C. 4 Gbps
- D. 2.5 Gbps
Answer: D
NEW QUESTION # 105
What type of video is best used to verify audio/video synchronization?
Response:
- A. Landscapes with orchestra music
- B. Team sports
- C. A blip-and-flash test reel
- D. News anchors speaking
Answer: C
NEW QUESTION # 106
Which of the following are associated with sound pressure levels?
(Select all that apply.)
Response:
- A. Is the ultimate method for quantifying background noise levels
- B. Eliminates distortion in speech reinforcement
- C. Can most accurately be measured with a Class 0 precision SPL meter
- D. Is typically measured in decibels (dB SPL)
Answer: C,D
NEW QUESTION # 107
What are characteristics that could affect an RT60 measurement?
Response:
- A. Impedance and power requirements
- B. Heat load and air requirements
- C. Luminance ratio, contrast and color temperature
- D. Absorption, reflection and diffusion
Answer: D
NEW QUESTION # 108
Which of the following control system components is used to control multiple zones and devices by performing a series of automatic and independent functions?
Response:
- A. Central processing unit
- B. Control point
- C. Control system software
- D. Control interface
Answer: A
NEW QUESTION # 109
......
Updated AVIXA CTS-D Dumps – PDF & Online Engine: https://www.dumpstests.com/CTS-D-latest-test-dumps.html
PDF Exam Material 2025 Realistic CTS-D Dumps Questions: https://drive.google.com/open?id=1hRr3cvwQ2OJScNI8eS5tX_7jhAw6Kmab