Buy Latest Oct 14, 2024 D-RP-OE-A-24 Exam Q&A PDF - One Year Free Update
Download the Latest D-RP-OE-A-24 Dump - 2024 D-RP-OE-A-24 Exam Questions
EMC D-RP-OE-A-24 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 13
When replicating a Consistency Group between clusters using XtremlO at each site that are connected through Fibre Channel, what is the maximum throughput per RPA?
- A. 450 MB/s
- B. 300 MB/s
- C. 150 MB/s
- D. 240 MB/s
Answer: B
Explanation:
When setting up replication for a Consistency Group between clusters using XtremIO storage arrays at each site connected through Fibre Channel, the maximum throughput that can be expected per RecoverPoint Appliance (RPA) is 300 MB/s. This throughput is a measure of how much data can be transferred from one site to another per second by each RPA involved in the replication process.
The throughput capacity is important for planning and ensuring that the RecoverPoint system can handle the expected data load during replication activities. It affects the Recovery Point Objective (RPO) and the overall efficiency of the disaster recovery setup.The 300 MB/s figure provides a benchmark for administrators to gauge the performance capabilities of their RecoverPoint system when used in conjunction with XtremIO storage arrays1.
It's important to note that actual throughput can vary based on several factors, including network conditions, the amount of data being replicated, and the specific configuration of the RecoverPoint and XtremIO systems1.
NEW QUESTION # 14
What is the result of configuring the I/O throttling level to "low"?
- A. Limit the data parallelism and I/O parallelism on the particular RPA where the setting will permit a maximum read rate of 200 MB/s
- B. Limit the data parallelism and I/O parallelism of all RPAs in a RecoverPoint cluster to a maximum read rate of 10 MB/s
- C. Limit the data parallelism and I/O parallelism on the particular RPA where the setting will permit a maximum read rate of 10 MB/s
- D. Limit the data parallelism and I/O parallelism of all RPAs in a RecoverPoint cluster to a maximum read rate of 200 MB/s
Answer: C
NEW QUESTION # 15
An administrator wants to integrate Site Recovery Manager (SRM) with RecoverPoint. Where should the RecoverPoint storage replication adapter be installed?
- A. On servers running VCenter only
- B. On servers running SRM service only
- C. On the same servers running VCenter and the SRM service
- D. On a newly installed server
Answer: B
Explanation:
To integrate Site Recovery Manager (SRM) with RecoverPoint, the storage replication adapter is a critical component that allows SRM to manage RecoverPoint replication properly. The installation steps are as follows:
* Identify SRM Servers: Determine which servers are running the VMware Site Recovery Manager
* service.
* Install SRA: Install the RecoverPoint SRA on each of the SRM server hosts at both the recovery and protected sites.
* Verify Installation: Ensure that the SRA is correctly installed and recognized by the SRM service.
* Configure Replication: Use the SRA within SRM to configure and manage replication settings for disaster recovery.
It's important to use the most current version of the SRA to ensure optimal compatibility and available features.The SRA can be downloaded from the VMware website, and the SRA release notes and product documentation should be consulted to determine compatibility with SRM versions1.
NEW QUESTION # 16
What describes RecoverPoint asynchronous replication write operations to the Journal volumes?
- A. Writes to the Journal volume are typically small sequential writes
- B. Journal is written to at three times the rate of the production volumes
- C. Volumes of the same capacities will be concatenated and not striped
- D. Writes to the Journal volume are typically large sequential writes
Answer: D
Explanation:
In Dell RecoverPoint, the Journal volumes play a crucial role in asynchronous replication. They store a history of write operations that have occurred on the production volumes, allowing for point-in-time recovery and data rollback. The write operations to the Journal volumes are typically large sequential writes.This is because the Journal is designed to efficiently record and consolidate changes made to the production data, which often involves large blocks of data being written in sequence1.
The Journal's sequential write pattern is optimized for the replication process, ensuring that data is recorded with minimal impact on the production environment.This design choice reflects the need for the Journal to quickly and reliably capture data changes, which can then be replicated to the remote site asynchronously, without requiring immediate acknowledgment from the remote site1.
For detailed information on the configuration and operation of the Journal in a RecoverPoint system, it is recommended to refer to the official Dell RecoverPoint documentation or contact Dell EMC support for guidance specific to your system's configuration and version1.
NEW QUESTION # 17
What is the recommended wait period before running the Balance Load tool?
- A. 5 Days
- B. 7 Days
- C. 6 Days
Answer: C
Explanation:
The Dell RecoverPoint documentation recommends a wait period of 7 days before running the Balance Load tool. This period allows for the system to stabilize and for any anomalies in the load distribution to become apparent, ensuring that the Balance Load tool can operate effectively. It's important to note that this information is based on the best practices outlined in the Dell RecoverPoint documentation and may be subject to change with different versions or specific system configurations.For the most accurate and up-to-date information, it is always best to consult the latest official Dell RecoverPoint documentation or contact Dell EMC support directly1.
NEW QUESTION # 18
Which parameter is used as the Locking ID for a RecoverPoint/EX license?
- A. RecoverPoint Cluster ID
- B. RecoverPoint System ID
- C. XtremIO Management Server number
- D. Array serial number
Answer: B
Explanation:
The Locking ID for a RecoverPoint/EX license is typically associated with a unique identifier of the RecoverPoint system itself. This ID ensures that the license is applied to the correct system and is not interchangeable with other systems or components.The RecoverPoint System ID serves as this unique identifier, which is used to lock the license to a specific RecoverPoint installation1.
It's important to note that licensing information can be complex and may vary depending on the specific configuration and version of the RecoverPoint system.For the most accurate and up-to-date information, it is always best to consult the latest official Dell RecoverPoint documentation or contact Dell EMC support directly1.
NEW QUESTION # 19
After creating a Consistency Group with a local copy, initialization is taking longer than expected. What is a possible reason for this condition?
- A. Size mismatch between the production and the copy volumes
- B. Copy is not attached to the same splitter as production
- C. Limited WAN bandwidth is available to the RPAs
Answer: C
Explanation:
When initializing a Consistency Group with a local copy in a RecoverPoint environment, several factors can affect the duration of the process. One possible reason for a longer than expected initialization time is slow performing storage on the production array.If the production storage is not able to handle the I/O operations efficiently, it can lead to delays in the initialization process1.
Another factor to consider is the available bandwidth to the RecoverPoint Appliances (RPAs).Limited WAN bandwidth can also cause delays, but since the scenario mentions a local copy, WAN bandwidth is less likely to be the issue unless the RPAs are also handling remote replication1.
Size mismatch between the production and copy volumes or the copy not being attached to the same splitter as production could also be potential issues, but these would typically prevent initialization from proceeding rather than causing a delay1.
For a detailed diagnosis and resolution, it is recommended to review the system's performance metrics and logs, and consult the official Dell RecoverPoint documentation or contact Dell EMC support directly1.
NEW QUESTION # 20
After a logical corruption, data on a production volume is inaccessible. As the volume is replicated using RecoverPoint, the administrator decides to use the "Test a Copy and Recover Production" wizard to restore this volume to its state prior to the logical corruption.
What is the correct sequence of steps to complete the recovery activity?
Answer:
Explanation:
Explanation:
A screenshot of a recovery program Description automatically generated with medium confidence
To recover a production volume that has become inaccessible due to logical corruption using RecoverPoint's
"Test a Copy and Recover Production" wizard, follow these steps:
* Select a snapshot prior to the corruption: Identify and choose the appropriate point-in-time image from the Journal that was taken before the corruption occurred.
* Mount the snapshot to a verification host and verify its integrity: Attach the selected snapshot to a non-production host where you can perform checks to ensure the data is consistent and free from corruption.
* Unmount the production volume as the Recovery wizard will overwrite it with the recovery data:
Ensure that the current production volume is not in use because the recovery process will overwrite the existing data with the data from the snapshot.
* Monitor the progress of recovery from the Unisphere 'Manage Recovery' wizard: Use Dell EMC's Unisphere interface to track the recovery process and ensure that the data is being restored correctly.
These steps are based on the standard procedures outlined in Dell RecoverPoint documentation for using the "Test a Copy and Recover Production" wizard to restore volumes to a previous state1.
NEW QUESTION # 21
Which RecoverPoint CLI command can be used to show a summarization of the errors and warnings for either one site or the entire RecoverPoint system?
- A. get_clusters_topology
- B. get_system_status
- C. get_events_log
- D. get_rpa_states
Answer: B
NEW QUESTION # 22
A RecoverPoint administrator is failing over a Consistency Group including two non-production copies. What will be the replication state between the new production and former production when the administrator selects "Set Copy as Production"?
- A. A volume sweep is started between the new production and former production
- B. Replication is paused between the new production and former production
- C. A short initialization is started between the new production and former production
- D. A full sweep is started between the new production and former production
Answer: D
Explanation:
Questions no:What will be the replication state between the new production and former production when the administrator selects "Set Copy as Production"?
Verified answer:When "Set Copy as Production" is selected, the failover replica copy is confirmed as the new Production and initiates replication to additional replicas other than the original Production copy which is already receiving writes after the failover1. This means that the replication state between the new production and former production would involve initiating replication to the additional replicas.
Step by Step Comprehensive Detailed Explanation with References:
* Failover Occurs: The administrator initiates a failover, which involves switching the roles of the production and non-production copies.
* Set Copy as Production: The administrator selects the "Set Copy as Production" option, which confirms the failover replica copy as the new Production.
* Replication Initiated: Replication is initiated to additional replicas, excluding the original Production copy, which continues to receive writes after the failover.
* State of Former Production: The former production copy, now a replica, will be in a state where it is receiving the replicated data from the new production copy.
This process ensures that the data protection and replication continue seamlessly after the failover, with the new production copy taking over the role of the source for replication1.
NEW QUESTION # 23
A RecoverPoint administrator is adding a new user to the system using Unisphere. Which pre-defined user is used to add a new user?
- A. security-admin
- B. boxmgmt
- C. security
- D. admin
Answer: A
Explanation:
Only users with security permissions can add users, remove and edit permissions for users that have previously been added.--RecoverPoint Management Student Resource Guide
NEW QUESTION # 24
Which attributes can affect the Distribution phase of Consistency Groups?
- A. Change rate of the applications and number of replication sets
- B. Copy location, WAN bandwidth, and replication type
- C. Journal volume performance, storage array performance, and copy volume performance
- D. Compression and deduplication settings of the Consistency Group
Answer: A
Explanation:
The Distribution phase of Consistency Groups in a Dell RecoverPoint environment is influenced by several factors:
* Change Rate of Applications: The amount of data change occurring in the applications being protected can affect how quickly the data needs to be distributed.
* Number of Replication Sets: More replication sets can increase the complexity and load on the system during the Distribution phase.
* Copy Location: The geographical location of the copy in relation to the production site can impact latency and distribution times.
* WAN Bandwidth: Available bandwidth of the WAN connection between sites is crucial for timely data distribution.
* Replication Type: Whether the replication is synchronous or asynchronous can affect the Distribution phase.
* Compression and Deduplication Settings: These settings can optimize data transfer but also require processing that can impact distribution.
* Journal Volume Performance: The speed at which the Journal can record and distribute data is vital for the Distribution phase.
* Storage Array Performance: The overall performance of the storage array will influence how quickly data can be distributed.
* Copy Volume Performance: The performance of the copy volume can affect how quickly it can receive and integrate the distributed data.
Understanding and optimizing these attributes can help ensure efficient operation of the RecoverPoint system during the Distribution phase1.
NEW QUESTION # 25
Which types of I/O modules can be inserted into Slot1 of a Gen-6 RPA?
- A. 10 GbE copper or dual-stacked DB-9 ports
- B. 10 GbE optical or 10 GbE copper
- C. 1 GbE optical or 1 GbE copper
- D. 10 GbE optical or 1 Gb RJ45 copper
Answer: B
Explanation:
The Dell EMC RecoverPoint Gen6 appliance contains two slots for I/O modules. For Slot1, the supported I/O modules are 10-Gb optical fiber and 10-Gb twisted copper pair.This means that Slot1 can accommodate either
10 GbE optical or 10 GbE copper I/O modules1.
The I/O modules are network interface cards with the following characteristics:
* 10-GB OPTICAL FIBER MODULE: 4 ports, Ethernet network type, supported speed of 10 Gb, wire type of optical fiber (SFP+).
* 10-GB TWISTED COPPER PAIR MODULE: 4 ports, Ethernet network type, supported speed of 10 Gb, wire type of BASE-T twisted copper pair1.
These modules provide the necessary connectivity for the RecoverPoint appliance to manage replication setup and operations, ensuring efficient data protection and disaster recovery capabilities1.
NEW QUESTION # 26
A RecoverPoint administrator is planning to use RecoverPoint to protect their applications. The administrator needs to protect 8192 production volumes. The RecoverPoint system has two physical RPA clusters using VNX arrays.
What is a possible Consistency Group configuration?
- A. 8192 Consistency Groups, each with 1 remote copy and 1 local copy
- B. 4096 replication sets, each with 1 remote copy and 1 local copy
- C. 8192 replication sets, each with 1 remote copy and 1 local copy
- D. 4096 Consistency Groups, each with 1 remote copy and 1 local copy
Answer: B
NEW QUESTION # 27
Which point-in-time image can be tied to application events and is created by a user command?
- A. Bookmark
- B. Snapshot
- C. Direct Access
- D. Virtual Image Access
Answer: A
Explanation:
In Dell RecoverPoint, a Bookmark is a user-created point-in-time image that can be tied to specific application events. This feature allows users to mark a particular point in time within the continuous data protection timeline of RecoverPoint, which can be used for recovery purposes. Here's how it works:
* User Command: A user issues a command to create a Bookmark, typically through the RecoverPoint management interface or via scripting.
* Tied to Application Events: The Bookmark can be associated with specific application events, such as before and after a significant update or batch process.
* Point-in-Time Image: The Bookmark represents a point-in-time image of the data at the moment the
* Bookmark was created.
* Recovery: In the event of data corruption or loss, the Bookmark can be used to recover data to the exact state it was in at the time of the Bookmark.
Bookmarks are an integral part of RecoverPoint's data protection capabilities, providing flexibility and precision for data recovery operations1.
NEW QUESTION # 28
A RecoverPoint administrator performs a Consistency Group failover to a remote copy. What happens to the point-in-time images stored in the copy Journal after the copy becomes production?
- A. Images are consolidated
- B. Images are replicated to the new production Journal
- C. Images are replicated to the new copy Journal
- D. Images are deleted
Answer: D
Explanation:
When a Consistency Group failover is performed to a remote copy in a Dell RecoverPoint system, the point-in-time images stored in the copy Journal are deleted after the copy becomes the new production.This is because the copy Journal's role is to maintain a record of changes for recovery purposes, and once the copy is promoted to production, its Journal is reset to start recording new changes from that point forward1.
The process involves the following steps:
* Failover Initiated: The administrator initiates a failover to the remote copy.
* Copy Becomes Production: The remote copy is promoted to the production role.
* Journal Reset: The point-in-time images in the copy Journal are deleted as part of the promotion process.
* New Production Journal: A new production Journal is started to record changes from the new production copy moving forward.
This ensures that the RecoverPoint system can continue to protect the data with a fresh start for the new production environment1.
NEW QUESTION # 29
Which Consistency Group setting is directly affected by the maximum Journal lag setting?
- A. Compression
- B. RPO
- C. Deduplication
Answer: A
Explanation:
The Journal lag in a Dell RecoverPoint system refers to the amount of data that has been written to the production volumes but has not yet been replicated to the remote site or copy volumes. The maximum Journal lag setting affects the RPO because it determines the maximum allowable time or data volume that can pass before the data must be replicated to the remote site to meet the recovery objectives.
Here's how the Journal lag impacts the RPO:
* Journal Lag Definition: Journal lag is the measure of the difference between the most recent write to the production volume and what has been replicated to the copy volume.
* RPO Impact: The RPO is the maximum targeted period in which data might be lost from an IT service due to a major incident. If the Journal lag exceeds the maximum setting, itmeans that the RPO could be breached, as there would be more data at risk of being lost than what is acceptable per the RPO policy.
* Management Actions: Administrators can monitor and manage the Journal lag to ensure that the RPO is maintained. If the lag approaches the maximum setting, actions may be taken to increase replication throughput or address any issues causing replication delays.
In summary, the maximum Journal lag setting is crucial for ensuring that the RPO is met, as it directly influences the amount of data that could be lost in the event of a failure or disaster1.
NEW QUESTION # 30
A company is using XtremlO for their RecoverPoint environment. They have approximately 100 GB of cumulative changes per day with the change being constant throughout the day. The company has a requirement to roll back 48 hours.
How should the Journals be sized and how should the copy policy be configured to ensure maximum protection with the least amount of storage used?
- A. 40 GB with the "Required Protection Window" set for 2 days
- B. 200 GB with the "Required Protection Window" set for Default
- C. 5 GB with the "Required Protection Window" set for 2 days
- D. 10 GB with the "Required Protection Window" set for 2 days
Answer: B
Explanation:
* Calculate Daily Changes: With 100 GB of cumulative changes per day, the total amount of changes over two days would be 200 GB.
* Determine Journal Size: The Journal size must be large enough to store all the changes for the required rollback periD.Therefore, a Journal size of 200 GB is necessary.
* Set Protection Window: The "Required Protection Window" should be set for 2 days to match the rollback requirement.
* Configure Copy Policy: The copy policy should be configured to ensure that the Journal maintains the point-in-time images for at least 48 hours.
By following these steps, the company can ensure maximum protection with the least amount of storage used, while also meeting their rollback requirements1234.
NEW QUESTION # 31
For which type of EMC storage array(s) is the RecoverPoint/BK used for in local backups?
- A. VNX/VNXe, Unity
- B. Avamar
- C. Data Domain
- D. NetWorker
Answer: C
Explanation:
RecoverPoint/BK license mode is for local backup of Data Domain storage. RecoverPoint/BK is system-based licensing for all clusters in a RecoverPoint system:
*Synchronous replication
*Multipath I/O support
*Virtualization hypervisor support for Hyper-V and VMware platforms.
*Integration with VMware vCenter, VMware SRM and vSphere VAAI support
*Built-in bandwidth reduction
*Two to eight RecoverPoint appliances per RPA cluster for failure resiliency and throughput
* RecoverPoint/BK Overview:
* RecoverPoint/BK is a specialized licensing mode designed for local backup operations specifically aimed at EMC's Data Domain storage systems. It enhances the data protection capabilities by integrating with Data Domain for efficient backup and recovery processes.
* Functionality and Features:
* Local Backup: The RecoverPoint/BK license mode is particularly utilized for local backups of Data Domain storage arrays. It ensures that the data stored on Data Domain systems can be effectively backed up and restored locally.
* Synchronous Replication: Provides real-time data replication between the primary and backup locations to ensure data consistency.
* Multipath I/O Support: Ensures high availability and reliability by providing multiple data paths to storage.
* Hypervisor Support: Supports virtualization platforms such as Hyper-V and VMware, allowing integration with various virtualized environments.
* Integration with VMware: Supports integration with VMware vCenter, VMware SRM, and vSphere VAAI, enabling seamless management and operation within VMware environments.
* Bandwidth Reduction: Includes built-in features to reduce bandwidth usage during data replication and backup operations.
* Resiliency and Throughput: Supports two to eight RecoverPoint appliances per RPA cluster, enhancing failure resiliency and throughput for robust data protection.
* Reference from EMC Documentation:
* RecoverPoint/BK license mode is explicitly mentioned for local backups of Data Domain storage arrays, providing a comprehensive data protection solution with advanced features tailored for Data Domain.
NEW QUESTION # 32
What is the purpose of the save_settings command?
- A. Commit cluster configuration changes to the repository volume
- B. Preserve the configuration of a RecoverPoint Appliance prior to replacement
- C. Create a script file that can later be used to recreate the system configuration
- D. Modify or configure the RecoverPoint configuration backup interval
Answer: A
Explanation:
The save_settings command in Dell RecoverPoint is used to commit cluster configuration changes to the repository volume. When changes are made to the RecoverPoint cluster configuration, they need to be saved to ensure that they persist across system reboots and are recognized by all nodes in the cluster.The repository volume serves as a centralized storage location for these configurations1.
The process of using the save_settings command is as follows:
* After making configuration changes to the RecoverPoint cluster, the administrator issues the save_settings command.
* The command commits the changes to the repository volume, which is a dedicated space on the storage array for storing system settings.
* This ensures that the configuration changes are preserved and can be accessed by the RecoverPoint Appliances (RPAs) when needed1.
It's important to note that the save_settings command does not create a script file for later use, nor does it modify the configuration backup interval.Its primary function is to ensure that any changes made to the cluster configuration are saved and applied correctly1.
NEW QUESTION # 33
In Unisphere for RecoverPoint, which wizard will allow an administrator to manage and monitor all currently accessed copies undergoing testing, failover, and production recovery?
- A. Manage Recovery
- B. Protect Volumes
- C. Manage Protection
- D. Test a Copy
Answer: A
Explanation:
In Unisphere for RecoverPoint, the "Manage Recovery" wizard is the tool that allows administrators to manage and monitor all currently accessed copies that are undergoing testing, failover, and production recovery. This wizard provides a centralized interface for overseeing the recovery operations and ensuring that they are proceeding as expected. It includes features to:
* View the status of recovery operations.
* Manage failover and failback processes.
* Monitor the progress of data synchronization and access during testing1.
This wizard is an essential part of the RecoverPoint management suite, providing administrators with the capabilities needed to ensure the continuity and integrity of their data protection processes1.
NEW QUESTION # 34
In a RecoverPoint environment, which EMC array supports Snap-based replication?
- A. Unity
- B. Data Domain
- C. XtremIO
- D. VPLEX
Answer: A
Explanation:
In a Dell EMC RecoverPoint environment, Snap-based replication is supported by the Unity array. This feature leverages the intelligent array-based snapshot capability available in Dell EMC Unity platforms.It enhances asynchronous replication by allowing a user-defined interval for replication, which is particularly useful for environments where minimizing the replication window is critical1.
The Snap and Replicate feature is enabled by leveraging the intelligent array-based snapshot capability available in Dell EMC VNX, XtremIO, and VMAX3/AF platforms as well1.However, for the specific context of the question, which focuses on the EMC array that supports Snap-based replication in a RecoverPoint environment, the correct answer is Unity2.
For the most accurate and up-to-date information, it is always best to consult the latest official Dell RecoverPoint documentation or contact Dell EMC support directly3.
NEW QUESTION # 35
Which command can be used to reduce the impact of the initial volume synchronization on production applications?
- A. config_io_throttling throttling=none
- B. config_link_policy group=cgname copy_1=prod_copy copy_2=dr_copy regulate_application=no
- C. config_link_policy group=cgname copy_1=prod_copy copy_2=dr_copy regulate_application=yes
- D. config_io_throttling throttling=high
Answer: C
Explanation:
To reduce the impact of the initial volume synchronization on production applications in a Dell RecoverPoint system, the config_link_policy command can be used with the regulate_application=yes parameter.This command configures the link policy for a Consistency Group and allows for the regulation of I/O to minimize the impact on production applications during synchronization1.
The process involves:
* Identifying the Consistency Group: Determine the name of the Consistency Group that contains the production volume you wish to regulate.
* Running the command: Execute the config_link_policy command with the appropriate parameters, including the Consistency Group name and the copies involved.
* Setting regulate_application=yes: This parameter tells the system to regulate the application I/O, which helps to manage the load on production applications during the initial synchronization.
* Monitoring the impact: After applying the command, monitor the production applications to ensure that the impact of the synchronization is minimized as intended.
This command is part of the RecoverPoint CLI and is used to manage the performance impact of replication activities on production environments1.
NEW QUESTION # 36
Why is Image Access instantaneous when testing a copy with XtremlO arrays?
- A. No rolling forward or backward of the Journal is required
- B. RecoverPoint performs initialization based on the DIFF result
- C. RecoverPoint uses XtremIO synchronous Snap-based replication
- D. XtremlO completes the copy "roll back" as a background task
Answer: A
Explanation:
When using XtremIO arrays with RecoverPoint, Image Access is instantaneous because there is no need to roll the Journal forward or backward. This is due to the way XtremIO handles snapshots, which are used by RecoverPoint during the Image Access process:
* Snapshot Creation: XtremIO creates snapshots very efficiently, without the need for a full copy of the data. These snapshots are pointer-based, meaning they reference the original data without duplicating it.
* Instant Access: When Image Access is initiated, RecoverPoint can immediately present a snapshot to the host because it's simply a matter of accessing the pointers to the existing data, rather than having to roll data forward or backward in the Journal.
* Continuous Replication: Even while Image Access is in use, replication and distribution continue unaffected, ensuring that protection of the production data is maintained1.
This capability is part of what makes XtremIO an effective storage solution for environments requiring rapid access to multiple data points for testing, development, or recovery purposes1.
NEW QUESTION # 37
......
Verified D-RP-OE-A-24 Dumps Q&As - 1 Year Free & Quickly Updates: https://www.dumpstests.com/D-RP-OE-A-24-latest-test-dumps.html
Latest EMC D-RP-OE-A-24 Certification Practice Test Questions: https://drive.google.com/open?id=13yVgnfUxx-55Q9br_rMfdieZlaUNir4i