Best Value Available! 2025 Realistic Verified Free 250-587 Exam Questions [Q173-Q193]

Share

Best Value Available! 2025 Realistic Verified Free 250-587 Exam Questions

Pass Your Exam Easily! 250-587 Real Question Answers Updated

NEW QUESTION # 173
When working on Storage Foundation 5.0 on HP-UX, you are unable to log in to Veritas Enterprise Administrator. You have converted shadow passwords with long passwords. After converting to shadow password with long password, the users are unable to log into Veritas Enterprise Administrator. You check and ensure that the users are part of the vrtsadm group. Error" V-39- 53247-3 Error while connecting to Server. The user name or password is incorrect. Please retype your user name and password, and try connecting to the server again." You want to ensure all users who are part of the vrtsadm group are able to log on to the Veritas Enterprise Administrator. What should you do?

  • A. Change the Shadow password.
  • B. Apply appropriate patch to Veritas Enterprise Administrator.
  • C. Retype the username and password.
  • D. Restart the Volume Manager.

Answer: B


NEW QUESTION # 174
While accessing a node in the Dynamic Multipathing (DMP) database you get an error "VxVM vxdmp NOTICE V-5-0-111 disabled dmpnode dmpnode_device_number".
How will you resolve this error? (Each correct answer presents part of the solution. Select two.)

  • A. Enable the appropriate controllers to allow at least one path under this DMP node.
  • B. Replace the hardware because there may be a problem with host-bus adapter.
  • C. Check the underlying hardware to recover the desired path.
  • D. If possible correct the hardware failures Then, recover the volume using the vxrecover command.

Answer: A,C


NEW QUESTION # 175
You need to create a storage checkpoint that contains file system metadata and data blocks. You want to ensure that the storage checkpoint that you create can be mounted, accessed, and written in Veritas File System. The storage checkpoint that you create must represent an image of the active file system. Which type of storage checkpoint should you create to meet this goal?

  • A. Create data storage checkpoint.
  • B. Create non-mountable storage checkpoint.
  • C. Create removable storage checkpoint.
  • D. Create nodata storage checkpoint.

Answer: A


NEW QUESTION # 176
Which interface provides single sign-on access for the purpose of administering Data Loss Prevention servers, managing policies, and remediating incidents?

  • A. Symantec Data Insight
  • B. Symantec Protection Center
  • C. Symantec Messaging Gateway
  • D. Symantec Information Manager

Answer: B


NEW QUESTION # 177
While administrating the Veritas Volume Manager for Veritas Storage Foundation, you have accidentally destroyed the disk group. You now need to recover the destroyed disk group. You are sure that disk group have not been modified or reused before recovering the disk group. What step do you need to perform to recover the destroyed disk groups?

  • A. Use the vxdg import command to import the disk group with the disk group id.
  • B. Use vxdarestore command to restore the disk group.
  • C. Use vxrecover disk group command to recover the disk group.
  • D. Use vxconfigrstore to recover the disk group.

Answer: A


NEW QUESTION # 178
While deporting a disk group under the VxVM control, the disk group fails. What could be the possible reason for the disk group failure?

  • A. The disk group contains volumes that are in use.
  • B. An access to the disk group is disabled.
  • C. The database is unmounted.
  • D. The file system is unmounted.

Answer: A


NEW QUESTION # 179
What causes the majority of data loss prevention violations?

  • A. hackers exploit vulnerabilities and exfiltrate confidential data
  • B. companies lack security policies to prevent loss of confidential data
  • C. employees unintentionally expose confidential data
  • D. system backups are performed improperly

Answer: C


NEW QUESTION # 180
You are administering the Storage Foundation 5.0 environment in your organization. There is one particular file system that continually shows a high level of fragmentation. What should you do to prevent fragmentation?

  • A. Schedule regular defragmentation runs using the cron command.
  • B. Allocate the space available in the file system that best fits the data.
  • C. Use the df command regularly to monitor free space.
  • D. Set the initial_extent_size tunable VxFS I/O parameter.

Answer: A


NEW QUESTION # 181
Which valid automated response option should an administrator choose for Email Prevent?

  • A. add metadata to email headers of confidential email
  • B. modify the body of email messages containing confidential data
  • C. modify the message subject or add specific RFC-2822 headers
  • D. process confidential email re-routed to a specified email list

Answer: C


NEW QUESTION # 182
You need to increase the size of an existing volume to 10 gigabytes. You also want to exclude storages on the controller c1 from being allocated. To meet the required goal, you execute the following command, but when executed, the command fails. vxassist -g mydg1 growto vol1 10g \use_storage='noneof("Controller"="c1")' What could be the possible cause for the failure?

  • A. The growto parameter needs to be replaced by maxby parameter.
  • B. The size specified is smaller than the current size of the volume.
  • C. You cannot exclude the c1 controller.
  • D. The growto parameter needs to be replaced by growby parameter.

Answer: B


NEW QUESTION # 183
A DLP administrator is testing Web Prevent functionality. When the administrator posts a small test file to a cloud storage website, a new incident fails to appear. What should the administrator do to allow incidents to be generated against this file?

  • A. uncheck trial mode under the ICAP tab
  • B. change the 'Ignore Requests Smaller Than' value to 1
  • C. change the PacketCapture.DISCARD_HTTP_GET value to 'false'
  • D. add the filename to the Inspect Content Type field

Answer: B


NEW QUESTION # 184
How many free partitions do you need to encapsulate a boot disk?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C


NEW QUESTION # 185
A Network Monitor server has been installed and the networking components configured accordingly. The server is receiving traffic, but fails to detect incidents. Running Wireshark indicates that the desired traffic is reaching the detection server. What is the most likely cause for this behavior?

  • A. The mirrored port is sending corrupted packets.
  • B. The communication to the database server is interrupted.
  • C. The wrong interface is selected in the configuration.
  • D. The configuration is set to process GET requests.

Answer: A


NEW QUESTION # 186
There are four volumes that are striped across five disks. One of the disks fails. From how many volumes will you restore the data?

  • A. Two volumes
  • B. Three volumes
  • C. Four volumes
  • D. One volume

Answer: C


NEW QUESTION # 187
You execute the qio_convertdbfiles command to convert the database files to use Quick I/O. The command results with an error that the database files are not on a VxFS file system. You need to convert the database files to use Quick I/O. What should you do?

  • A. Set the database type to DB2.
  • B. Predefine the DB2 environment variable $DB2DATABASE.
  • C. Run the qio_getdbfiles command to get the database files on the VxFS file system.
  • D. Remove the files from the mkgio.dat file.

Answer: D


NEW QUESTION # 188
Which two options are available when selecting an incident for deletion? (Select two.)

  • A. delete the incident and export incident details to .CSV file
  • B. delete all attachments or files and export incident to .XML file
  • C. delete the incident completely
  • D. delete the incident and retain the original message
  • E. delete the original message and retain the incident

Answer: C,E


NEW QUESTION # 189
While working under Veritas Volume Manager, you want to put a disk under the Veritas Volume Manager control. You execute the command vxdiskadd c0t1d0. What is the result of this command?

  • A. The command puts first disk under VxVM control on the first controller.
  • B. The command encapsulates the second disk on the first controller.
  • C. The command checks for the disks can be encapsulated.
  • D. The command initializes second disk on the first controller.

Answer: D


NEW QUESTION # 190
A company needs to implement Data Owner Exception so that incidents are avoided when employees send or receive their own personal information. Which underlying technology should the company use?

  • A. Vector Machine Learning (VML)
  • B. Indexed Document Matching (IDM)
  • C. Exact Data Matching (EDM)
  • D. Described Content Matching (DCM)

Answer: C


NEW QUESTION # 191
You are responsible for administering a server with mirrored volume layouts. You noticed that the last time the server was down, the server took longer than usual to resynchronize the mirrors. You want to make configuration changes on the server to reduce resynchronization time. Which actions will you perform?

  • A. Run the vxse_redundancy rule and plan configuration changes to eliminate any rule violations it reports.
  • B. Run the vxprint command, inspect the storage configuration manually, and write a plan to place dirty region logs on the three biggest volumes.
  • C. Run the vxse_drl1 rule and plan configuration changes to eliminate any rule violations it reports.
  • D. Run the vxse_rootmir rule and plan configuration changes to eliminate any rule violations it reports.

Answer: C


NEW QUESTION # 192
Ten test agents are being deployed that use an uninstall password required to uninstall the DLP Agent. The agents deploy and install correctly. Upon testing to remove the Agent, the uninstall password fails to work. The deployment team used 'Symantec' for the UninstallPasswordKey. Why does the uninstall fail when using the same password?

  • A. the PGPsdk.dll file was missing when the key was created
  • B. uninstall passwords are restricted from containing the word 'Symantec'
  • C. the uninstall agent password needs to match the uninstall password key
  • D. the UninstallPwdKeyGenerator must be used to create an UninstallPasswordKey

Answer: D


NEW QUESTION # 193
......

Actual Questions Answers Pass With Real 250-587 Exam Dumps: https://www.dumpstests.com/250-587-latest-test-dumps.html

250-587 Dumps Prepare Your Exam With 303 Questions: https://drive.google.com/open?id=1grdkqrM9NLbChu7V6Cn-zzCRKlst2NWw