API-571 Dumps with Free 365 Days Update Fast Exam Updates [Q94-Q115]

Share

API-571 Dumps with Free 365 Days Update Fast Exam Updates

Verified API-571 dumps Q&As - 2022 Latest API-571 Download

NEW QUESTION 94
Since all fuels contain some amount of sulfur, sulfuric and sulfurous acid __________ can occur if the metal temperature is below this temperature.

  • A. All of the above
  • B. Corrosion
  • C. Dew point corrosion
  • D. Pitting

Answer: C

 

NEW QUESTION 95
The amplitude and frequency of vibration as well as the _________ of the components are critical factors in vibration-induced fatigue.

  • A. Velocity
  • B. Temperature
  • C. Material properties
  • D. Fatigue resistance

Answer: D

 

NEW QUESTION 96
Primarily hot-wall piping and equipment in the following units can be affected by graphitization. FCC, catalytic reformer and ______.

  • A. Hydrotreater
  • B. Hydrocracker
  • C. Coker
  • D. Alky

Answer: C

 

NEW QUESTION 97
Hydrogen blisters may form as surface bulges on the ID, the OD on within the wall thickness of a pipe or pressure vessel. Blistering occurs from hydrogen generated by ______, not hydrogen gas from the process stream.

  • A. H2S
  • B. Hydriding
  • C. Corrosion
  • D. Sulfur

Answer: C

Explanation:
Explanation

 

NEW QUESTION 98
Which of the following materials are the least susceptible to caustic embrittlement?

  • A. Nickel base alloys
  • B. Carbon steel
  • C. Stainless steel
  • D. 9Cr-0.5 Mo

Answer: A

 

NEW QUESTION 99
Different organisms thrive on different nutrients including inorganic substances (Sulfur, H2S), and organic substances (Hydrocarbons, Organic acids). In addition, all organisms require a source of carbon, nitrogen and
_______ for growth.

  • A. Water
  • B. Oxygen
  • C. Manganese
  • D. Phosphorous

Answer: D

 

NEW QUESTION 100
Which API RP recommends programs to monitor small-bore piping, flange faces, blistering and HIC/SOHIC in HF alky units?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

 

NEW QUESTION 101
With thermal fatigue, time to failure is a function of the magnitude of the stress and the number of cycles and decreases with _________ stress and ________ cycles.

  • A. Decreasing, Increasing
  • B. Decreasing, Decreasing
  • C. Increasing, Decreasing
  • D. Increasing, Increasing

Answer: D

 

NEW QUESTION 102
In general, the resistance of iron and nickel based alloys to sulfidation is determined by the ________ content of the material.

  • A. Molybdenum
  • B. Alloying
  • C. Chromium
  • D. Carbon

Answer: C

 

NEW QUESTION 103
If wet electrodes or high moisture content flux is used, ________ can be charged into the steel resulting in delayed cracking.

  • A. H²O
  • B. Hydrogen
  • C. Oxygen
  • D. Atomic hydrogen

Answer: B

 

NEW QUESTION 104
__________ caustic concentrations and ________ temperatures increase the likelihood and severity of cracking with caustic embrittlement.

  • A. Decreasing, Increasing
  • B. Decreasing, Decreasing
  • C. Increasing, Decreasing
  • D. Increasing, Increasing

Answer: D

 

NEW QUESTION 105
Proper application of ________ will control but not eliminate microbes that cause MIC so that continued treatment is necessary.

  • A. None of the above
  • B. Biocides
  • C. Ozone
  • D. Caustic

Answer: B

 

NEW QUESTION 106
For a specific material, HTHA is dependent on temperature, hydrogen partial pressure, time and _________.

  • A. Pressure
  • B. Velocity
  • C. Stress
  • D. Alloy composition

Answer: C

 

NEW QUESTION 107
With sulfuric acid corrosion, carbon steel corrosion rates increase significantly if the flow velocity exceeds about ________m fps or at acid concentrations below _________.

  • A. 2-3, 65%
  • B. 6-9, 80%
  • C. 5-7, 75%
  • D. 4-6, 85%

Answer: A

 

NEW QUESTION 108
Ammonium chloride salts may be whitish, greenish or _________.

  • A. Reddish
  • B. Bluish
  • C. Yellowish
  • D. Brownish

Answer: D

 

NEW QUESTION 109
Since all fuels contain some amount of sulfur, sulfuric and sulfurous acid __________ can occur if the metal temperature is below this temperature.

  • A. All of the above
  • B. Corrosion
  • C. Dew point corrosion
  • D. Pitting

Answer: C

 

NEW QUESTION 110
_________ is a selective corrosion mechanism in which one or more constituents of an alloy are preferentially attacked leaving a lower density often porous structure.

  • A. Preferentially weld attack
  • B. Carburization
  • C. Dealloying
  • D. Phenol corrosion

Answer: C

 

NEW QUESTION 111
Which of the following does not increases the likelihood of atmospheric corrosion?

  • A. Increasing operating pressures
  • B. Locations where moisture is trapped
  • C. Bird poop
  • D. Increasing amounts of airborne contaminates
  • E. Increasing annual rainfalls

Answer: A

 

NEW QUESTION 112
In HF service, carbon steel operating above ________ should be closely monitored for loss in thickness and may need to be upgraded to Alloy 400.

  • A. 160(o) F
  • B. 200(o) F
  • C. 175(o) F
  • D. 150(o) F

Answer: D

 

NEW QUESTION 113
Sulfidation is primarily caused by:

  • A. Impacting particles.
  • B. Operators failing to adequately control the ph of sulfur streams.
  • C. Sulfur compounds being created in the FCCU (Cat Cracking Unit).
  • D. Sulfur compounds decomposing at higher temperatures.
  • E. Elemental sulfur collecting in stagnate areas, e.g. dead legs.

Answer: D

 

NEW QUESTION 114
Hydrogen blisters may form as surface bulges on the ID, the OD on within the wall thickness of a pipe or pressure vessel. Blistering occurs from hydrogen generated by ______, not hydrogen gas from the process stream.

  • A. H(2)S
  • B. Hydriding
  • C. Corrosion
  • D. Sulfur

Answer: C

 

NEW QUESTION 115
......


Difficulty in writing API-571 Exam

Mostly job holder candidates give a short time to their study and want to pass the exam with good marks. Thereby we have many ways to prepare and practice for exams in a very short time that help the candidates to ready for exams in a very short time without any tension. Candidates can easily prepare API-571 exams from DumpsTests because we are providing the best API-571 exam dumps which are verified by our experts. DumpsTests has always verified and updated API-571 exam dumps that helps the candidate to prepare his exam with little effort in a very short time. We also provide latest and relevant study guide material which is very useful for a candidate to prepare easily for API-571 exam dumps. Candidate can download and read the latest exam dumps in PDF and VCE format. DumpsTests is providing real questions of API-571 exam dumps. We are very fully aware of the importance of student time and money that's why DumpsTests give the candidate the most astounding brain exam dumps having all the inquiries answer outlined and verified by our experts.


API API-571 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Damage Mechanisms
Topic 2
  • Affecting Fixed Equipment
Topic 3
  • Refining Management

 

Updated API Study Guide API-571 Dumps Questions: https://www.dumpstests.com/API-571-latest-test-dumps.html

Dumps Questions [2022] Pass for API-571 Exam: https://drive.google.com/open?id=1JLrrmn4mD3GQ05Biq-bmrESYK6bqybAc