[2023] Free 72301X Exam Dumps to Pass Exam Easily
72301X Exam Dumps, 72301X Practice Test Questions
NEW QUESTION # 43
Right after an Avaya Breeze ™ installation, the customer called in stating WebRTC calls are not working.
Where can the administrator go to verify that the Avaya Breeze ™ server was configured to Accept Service?
- A. Avaya Aura System Manager command line, run thestatus servicecommand.
- B. Avaya Breeze ™ command line, and run thestatus servicecommand.
- C. Avaya Breeze ™ web GUI, and navigate to Avaya Breeze ™ Dashboard.
- D. Avaya Aura System Manager web GUI, and navigate to Breeze Dashboard.
Answer: D
NEW QUESTION # 44
When Avaya Session Border Controller for Enterprise (SBCE) initially receives the message from a SIP endpoint wanting to update their Presence status, which operation does it perform?
- A. It authenticates, encrypts the Presence status message, and replaces its own IP address with the Avaya Aura Presence (PS) IP address.
- B. It authenticates and encrypts the message and registers the user.
- C. It authenticates and encrypts the message, and replaces its own IP address with the Session Manager IP address.
- D. It authenticates message and encrypts the Presence status.
Answer: B
NEW QUESTION # 45
A customer calls Avaya support because their 3rd party SIP telephones are not working. Support is able to confirm that the telephones are not supported and do not integrate with Communication Manager or Session Manager.
Which two pre-implementation steps were omitted? (Choose two.)
- A. Test all third-party equipment and software.
- B. Establish connectivity.
- C. Upgrade Communication and Session Manager.
- D. Provide accurate licensing specification.
- E. Access support.avayA.com to verify customer systems compatibility.
Answer: A,E
NEW QUESTION # 46 
Refer to the exhibit.
In the Cluster Administration screen of a PresenceServices cluster, when you try to change the cluster state to Accept New Service, you receive the error:
Servers that are not in License Restricted mode assigned to the cluster are below the Minimum number of required servers.
You check that a server has been administered under Breeze > Server Administration which shows green check under License Mode, and a System State of Denying.
Which action needs to be taken to solve this problem?
- A. Edit the Cluster, access the Servers tab, and assign the server to the cluster; then set the cluster to Accept New Service.
- B. Under Avaya Breeze > Server Administration, select the server and change the System State to Accept New Service, then return to the Cluster Administration screen and set the cluster to Accept New Service.
- C. Edit the cluster to change the cluster profile from Core Platform to General Purpose.
- D. Obtain and install an Avaya Breeze™ license on webLM with more instances of Avaya Breeze™ nodes.
Answer: B
NEW QUESTION # 47
Considering the message flow to an Avaya Aura Contract Center (AACC) Agent Desktop, which protocol is used to communicate between AACC and Avaya Aura Application Enablement Services (AES)?
- A. TR87
- B. TSAPI
- C. DMCC
- D. WCF
Answer: B
NEW QUESTION # 48
You are troubleshooting a TLS link down message between Avaya Aura Session Manager (SM) and Avaya Session Border Controller for Enterprise (SBCE). Tracing on SM and SBCE reveals a Fatal Error Unknown CA message being sent by SBCE when it receives the Server Identity certificate from SM.
To solve this problem, which two actions need to be completed? (Choose two.)
- A. Add the Certificate Authority certificate into the TLS profile Peer Verification List.
- B. Install the Certificate Authority certificate that signed SBCE identity certificate into SM.
- C. Export the SBCE identity certificate and import it into SM.
- D. Install the Certificate Authority certificate that signed the SM identity certificate into SBCE.
Answer: A,D
NEW QUESTION # 49
Avaya Support personnel report a case, including root cause and resolution, in the Knowledge Base.
Which 8D Methodology discipline covers this action?
- A. D8
- B. D7
- C. D5
- D. D6
Answer: B
Explanation:
Explanation
https://quality-one.com/8d/#:~:text=The%208D%20problem%20solving%20process,similar%20problems%20in
NEW QUESTION # 50
A customer called in stating that none of their users can IM or see each other's Presence. After troubleshooting you discover that default gateway of the Avaya Breeze ™ SM100 has the wrong IP Address in the configuration.
Where would you go to correct this problem?
- A. Use Avaya Aura System Manager web GUI to update the SIP Entity screen.
- B. Use SSH to Avaya Breeze ™, and run SMnetSetup.
- C. Use SSH to Avaya Breeze ™, and use theroutecommand to correct the routing table.
- D. Use Avaya Aura System Manager web GUI to access the Engagement Development Platform < Server Administration, and edit the Server Instance.
Answer: B
NEW QUESTION # 51 
Refer to the exhibit.
Avaya Tier 3 support receives a case escalated by Tier 2 where the customer cannot receive incoming calls, but can make calls out successfully. The trace shows that the incoming calls arrive at the Avaya Session Border Controller for Enterprise (SBCE) but fail to get routed into the customer enterprise network.
Based on this information, what is and is not working?
- A. The local area network and Avaya Aura Session Manager are working. Avaya Aura Communication Manager is not working.
- B. The local area network, Avaya Aura Communication Manager, and Avaya Aura Session Manager are working. SBCE is not working.
- C. The local area network, Avaya Aura Communication Manager, and Avaya Aura Session Manager are working. The public network is not working.
- D. The local area network, Avaya Aura Communication Manager, and Avaya Aura Session Manager are working. SBCE is partially working, but routing may be incorrect.
Answer: D
Explanation:
Explanation
Communication Manager is working because can make calls out successfully, SBCE is partially working * Notice that the FROM header is an IP address instead of a domain name = avava.com. CM needs to see domain name. IP address to domain conversion is performed by Topology Hiding.
NEW QUESTION # 52
How can you enable all levels of the log, including debug, to be dumped into the ps.log file?
- A. Use SSH to the PresenceServices Avaya Breeze™ node and execute thece dlogon PresenceServicescommand.
- B. Use SSH to the PresenceServices Avaya Breeze™ node and execute theedp dlogon allcommand.
- C. Use SSH to Avaya Aura System Manager (SMGR) and execute theedp dlogon allcommand.
- D. Web browse to Avaya Aura System Manager (SMGR), navigate to Services > Events > Logs > Log Settings, then enter PresenceServices into the Logger filed, and enter ALL into Log Level.
Answer: D
NEW QUESTION # 53
What are the steps necessary to trace SIP messages going through the Avaya Session Border Controller for Enterprise (SBCE)?
- A. Login to the active Avaya Session Border Controller for Enterprise (SBCE) using SSH port 22, issue thesu - rootcommand, and then execute thetraceSBCcommand.
- B. Login to the EMS using a web browser, then access Device specific settings > Troubleshooting > Tracing, and click on Start traceSBC.
- C. Login to the EMS using port SSH 222, issue thesudo sucommand, and then execute thetraceSBCcommand.
- D. Login to the active Avaya Session Border Controller for Enterprise (SBCE) using SSH port 222, issue thesudo sucommand, and then executethe traceSBCcommand.
Answer: B
NEW QUESTION # 54
A technician is trying to access the Avaya Aura Media Server (AAMS) after receiving a troubleshooting ticket. After failing to enter the system using different web browsers, the technician realizes the incorrect URL was being used.
Which URL must be used to access the AAMS web page?
- A. https: AAMS FQDN or IP address:8443/emlogin
- B. https: SMGR FQDN or IP address:8443/emlogin
- C. https: AAMS FQDN or IP address:443/emlogin
- D. http: AAMS FQDN or IP address:8443/emlogin
Answer: A
NEW QUESTION # 55
A Maintenance Engineer logs onto the Command Line Interface (CLI) of Avaya Aura Messaging (AAM) and issues thevmstatcommand.
What information will the display present?
- A. status information about the virtual machine
- B. statistical information about voicemail boxes
- C. count of mailbox password violation attempts
- D. information about the volatile memory
Answer: D
NEW QUESTION # 56
Which tracing tools that help to debug WebRTC protocols are available on the Avaya Breeze™ platform?
- A. traceWEB and traceSM
- B. traceSTUN, traceTURN, and traceCE
- C. traceTURN, traceSTUN, and traceHTTP
- D. traceHTTP and traceCE
Answer: A
Explanation:
Explanation
https://downloads.avaya.com/css/P8/documents/100182172
NEW QUESTION # 57
Avaya currently uses the online tool called Avaya Diagnostic Methodology (ADM) for partners to raise trouble tickets and receive assistance, and expects customers/partners to have performed the following tasks before raising a trouble ticket.
1. Clearly stated the problem.
2. Detailed the findings.
3. Clarified the problem.
When they receive the trouble ticket, what is the next step in ADM that Avaya Tier 3 support will perform?
- A. Install a patch to fix the problem.
- B. Update the Knowledge Management database.
- C. Implement a solution.
- D. Praise individuals for contribution.
Answer: C
NEW QUESTION # 58
After upgrading Avaya Aura Application Enablement Services (AES), the customer's CTI application does not seem to be working.
Which two methods can be used to verify AES system status? (Choose two.)
- A. Access the AES command line, and run thestatus aesvcs cti-linkcommand.
- B. Access Communication Manager (SAT), and run thestatappcommand to view AES services status.
- C. Access the TSAPI web interface to monitor AES.
- D. Access the AES web console, and view the services status in the AES menu.
- E. Using Communication Manager's System Administration Terminal (SAT), run thestatus aesvcs ctilinkcommand to see the service state.
Answer: D,E
NEW QUESTION # 59
Which method can be used to verify the Client and TSAPI services have been administered correctly?
- A. The TSAPI test is call initiated from CTI endpoints using SIP telephones.
- B. The TSAPI test is call initialed from within Avaya Aura Communication Manager (CM) command line using the test TSAPI interface command.
- C. The TSAPI test is call initiated within the Utilities > Diagnostics > AE ServiceTSAPI Test menu.
- D. The TSAPI test is call initiated within the TSAPI web interface > TSAPI Monitoring Tool menu.
Answer: C
Explanation:
Explanation
https://downloads.avaya.com/css/P8/documents/101038591
NEW QUESTION # 60 
Refer to the exhibit.
SIP endpoint 101-1112 is updating its Presence status with the Avaya Aura Presence (PS).
Based on the exhibit, which statement about the message flow is true?
- A. Avaya Aura Presence sends Notify to the SIP endpoint via Avaya Session Border Controller for Enterprise.
- B. Avaya Aura Presence sends Notify to the telephone via Avaya Aura Session Manager.
- C. The telephone sends Subscribe message to Avaya Aura Session Manager via Avaya Session Border Controller for Enterprise.
- D. Phone sends Register message to Avaya Aura Session Manager via Avaya Session Border Controller for Enterprise.
Answer: B
NEW QUESTION # 61
You are trying to connect to the Avaya Session Border Controller (SBC) using the SSH client. After several attempts you cannot do it and realize that it is because you are using the wrong port.
Which port should you use to connect to the SBC using an SSH client?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: B
NEW QUESTION # 62
In Avaya Aura 7 the Avaya Session Border Controller for Enterprise (SBCE) license is installed on an external WebLM server and the EMS points to the WebLM server using a URL.
What is the correct syntax of that URL where 135.60.232.41 is the IP address of the WebLM server?
- A. https://135.60.232.41:8443/WebLM/LicenseServer
- B. https://135.60.232.41:52233/WebLM/LicenseServer
- C. https://135.60.232.41:8080/LicenseServer
- D. https://135.60.232.41/WebLM
Answer: B
NEW QUESTION # 63
......
72301X Exam Dumps, 72301X Practice Test Questions: https://www.dumpstests.com/72301X-latest-test-dumps.html
Free 72301X Study Guides Exam Questions and Answer: https://drive.google.com/open?id=1z8A729vUMgr4hGCpzPPkcdKKQuD1VqRc